Mechanical and Formaldehyde-related Properties of Medium Density Fiberboard with Zeolite Additive

Abstract

Zeolite was investigated as a potential component in the production of medium-density fiberboard (MDF). A mixture of beech (40%), oak (30%), and pine (30%) wood chips was used for fiber production. Chips were cooked for 4 min in an Asplund defibrator with a vapor pressure of 8 bar, and a temperature of 180 degrees C. Chemicals were added on fibers in the blow line. The resins were added at 11 wt% based on oven-dried wood fibers. Ammonium sulphate was added at 0.72 wt% based on resins. Paraffin wax was added as 1.8 wt% based on resin. Zeolite was prepared in a separate tank for its use instead of lignocellulosic fibers in the production of 1 m(3) MDF. The fibers were dried to 12% moisture. A temperature of approximately 190 degrees C and a pressure of approximately 32 kg.m(-2) were applied to the mixture for 280 s to make MDF panels (500 x 490 x 14 mm). Mechanical properties of MDF boards were significantly increased for bending (MOE) and elastic modulus (MOR), but a little negatively affected on internal bond (16), physical properties were negatively increased thickness swelling (ThS) and water absorption (WA). Consequently, increasing zeolite minerals in MDF boards showed best results of formaldehyde emission properties of MDF.