Basit öğe kaydını göster

dc.contributor.authorSenel, S
dc.contributor.authorSay, R
dc.contributor.authorArica, Y
dc.contributor.authorDenizli, A
dc.date.accessioned2020-06-25T17:34:51Z
dc.date.available2020-06-25T17:34:51Z
dc.date.issued2001
dc.identifier.issn0927-7757
dc.identifier.urihttps://doi.org/10.1016/S0927-7757(00)00841-4
dc.identifier.urihttps://hdl.handle.net/20.500.12587/2922
dc.descriptionWOS: 000167901500014en_US
dc.description.abstractDye-affinity and metal chelate affinity adsorption are increasingly used for protein separation. Synthetic hollow fiber membranes have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The goal of this study was to explore in detail the performance of hollow fibers composed of modified polyamide to which Cibacron Blue F3GA and Zn(II) were attached for adsorption of lysozyme. The polymer matrix was characterized by scanning electron microscopy. These dye-affinity and Zn(II) chelated hollow-fibers were used in the lysozyme adsorption-elution studies. The effects of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye-attached and metal-chelated hollow-fibers were studied in a batch reactor. The effect of Zn(II) loading on lysozyme adsorption was also studied. The non-specific adsorption of lysozyme on the polyamide hollow-fibers was 1.8 mg g(-1). Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 63.2 mg g(-1). Lysozyme adsorption capacity of the Zn(II) chelated hollow-fibers (144.2 mg g(-1)) was greater than that of the Cibacron Blue F3GA-attached hollow-fibers. A significant amount of the adsorbed lysozyme (up to 97%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pn 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye- and metal-chelate affinity chromatography with polyamide hollow-fibers can be applied for lysozyme adsorption without causing any significant conformational changes and denaturation. Repeated adsorption/elution processes showed that these novel dye-attached and Zn(II) chelated hollow-fibers are suitable for lysozyme adsorption. (C) 2001 Elsevier Science B.V. All rights reserved.en_US
dc.language.isoengen_US
dc.publisherElsevier Science Bven_US
dc.relation.isversionof10.1016/S0927-7757(00)00841-4en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjecthollow-fiber sorbentsen_US
dc.subjectCibacron Blue F3GAen_US
dc.subjectlysozymeen_US
dc.subjectdye affinity membranesen_US
dc.subjectpolyamideen_US
dc.subjectmetal chelatesen_US
dc.titleZinc ion-promoted adsorption of lysozyme to Cibacron Blue F3GA-attached microporous polyamide hollow-fiber membranesen_US
dc.typearticleen_US
dc.contributor.departmentKırıkkale Üniversitesien_US
dc.identifier.volume182en_US
dc.identifier.issue1-3en_US
dc.identifier.startpage161en_US
dc.identifier.endpage173en_US
dc.relation.journalColloids And Surfaces A-Physicochemical And Engineering Aspectsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster