Ara
Toplam kayıt 99, listelenen: 11-20
Synthesis and characterization of PET fibers grafted with binary mixture of 2-methylpropenoic acid and acrylonitrile by free radical: its application in removal of cationic dye
(Springer, 2017)
Grafting of binary vinyl monomer mixtures such as 2-methylpropenoic acid (MPA) and acrylonitrile (AN) onto poly (ethylene terephthalate) fibers (PET) was achieved in an aqueous medium with using benzoyl peroxide like free ...
Investigation of corrosion pattern of AISI 316 and AISI 304 stainless steels in Na2B4O7 center dot 5H(2)O solution
(Vserossiiskaya Assotsiatsiya Korrozionistov, 2017)
The corrosion behaviour of AISI 316 and AISI 304 stainless steels in Na2B4O7 center dot 5H(2)O solutions with various concentrations (3%, 6% and 9% w/w) commonly used in wood industry was investigated by using electrochemical ...
The Effects of Humidity on Cast PA6G during Turning and Milling Machining
(Hindawi Ltd, 2017)
We compared the foundry PA6G samples in several dry and humid but different storage environments by processing them under the same cutting conditions such as progress rate (100, 120, 140, and 160 mm/min), cutting rate (90, ...
Effect of Thermocycling on the Structure of Martensite and Kinetics of Martensitic Transformation in Alloy Fe-30% Ni-3% Pd
(Springer, 2017)
The methods of scanning electron microscopy, differential scanning calorimetry and x-ray diffraction are used to study the morphological and thermal characteristics of cooling-induced martensite in alloy Fe - 30% Ni - 3% ...
Manufacture Of Medium Density Fiberboard (Mdf) Panels From Agribased Lignocellulosic Biomass
(Slovak Forest Products Research Inst, 2017)
Lignocellulosics fibers and commercially-manufactured-chip (Pinus sylvestris L., Fagus orientalis and Quercus robur L.) with 11% moisture conten twere used for the experiment. The mixingratios of lignocellulosics fibers ...
Subcarrier Allocation Algorithm Based on Greedy-Like in Multi Carrier Code Division Multiple Access Systems
(Kaunas Univ Technology, 2017)
One of the most important issues to be taken into consideration in multi carrier communication systems with multi users is the assignment of the available resources to the users efficiently. Thus, how to determine the ...
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
Discrete Eigenvalues of Case Spectrum with Anisotropic Scattering
(Taylor & Francis Inc, 2018)
Discrete eigenvalues of a one-speed linear transport equation with anisotropic scattering are studied. It is shown that there is only one pair of real discrete eigenvalues for linear, quadratic, or triplet scattering for ...
Prediction of Surface Roughness considering Cutting Parameters and Humidity Condition in End Milling of Polyamide Materials
(Hindawi Ltd, 2018)
To know the impact of processing parameters of PA6G under different humidity conditions is important as it is vulnerable to humidity up to 7 %. This study investigated the effect of cutting parameters to surface roughness ...
Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites
(Int Inst Science Sintering (I I S S), 2018)
In this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under ...