Ara
Toplam kayıt 4, listelenen: 1-4
Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites
(Int Inst Science Sintering (I I S S), 2018)
In this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under ...
Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
(Gazi Univ, 2020)
In this study, 7075 grade aluminum-based composites reinforced with SiC (silicon carbide) and B4C (boron carbide) were produced with powder metallurgy at 40%, 20% and 10% reinforcement ratios. The mechanical properties of ...
Al1070/TiB2 Kompozitlerin Tornalanmasında TiB2 Takviye Miktarının Esas Kesme Kuvveti Ve Yüzey Pürüzlülüğüne Etkisi
(2020)
Bu çalışmada Al1070 matrisli TiB2takviyeli kompozitin işlenebilirliği incelenmiştir. İlk aşamada ağırlıkça %2, %4 ve %8 TiB2 takviyeli Al1070 kompozitler üretilmiştir. Daha sonra; kuru kesme şartlarında, 1 mm sabit kesme ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...