Ara
Toplam kayıt 3, listelenen: 1-3
Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
(Gazi Univ, 2020)
In this study, 7075 grade aluminum-based composites reinforced with SiC (silicon carbide) and B4C (boron carbide) were produced with powder metallurgy at 40%, 20% and 10% reinforcement ratios. The mechanical properties of ...
Effect of sintering temperature on pore ratio and mechanical properties of composite structure in nano graphene reinforced ZA27 based composites
(SPRINGER, 2020)
Nano graphene platelet (Gr) reinforced nano composites with a zinc-aluminum alloy (ZA27) matrix were produced by powder metallurgy at four different mass ratios (0.5wt%, 1.0wt%, 2.0wt% and 4.0wt%) and three different ...
Al1070/TiB2 Kompozitlerin Tornalanmasında TiB2 Takviye Miktarının Esas Kesme Kuvveti Ve Yüzey Pürüzlülüğüne Etkisi
(2020)
Bu çalışmada Al1070 matrisli TiB2takviyeli kompozitin işlenebilirliği incelenmiştir. İlk aşamada ağırlıkça %2, %4 ve %8 TiB2 takviyeli Al1070 kompozitler üretilmiştir. Daha sonra; kuru kesme şartlarında, 1 mm sabit kesme ...