Ara
Toplam kayıt 68, listelenen: 11-20
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
Discrete Eigenvalues of Case Spectrum with Anisotropic Scattering
(Taylor & Francis Inc, 2018)
Discrete eigenvalues of a one-speed linear transport equation with anisotropic scattering are studied. It is shown that there is only one pair of real discrete eigenvalues for linear, quadratic, or triplet scattering for ...
Prediction of Surface Roughness considering Cutting Parameters and Humidity Condition in End Milling of Polyamide Materials
(Hindawi Ltd, 2018)
To know the impact of processing parameters of PA6G under different humidity conditions is important as it is vulnerable to humidity up to 7 %. This study investigated the effect of cutting parameters to surface roughness ...
Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites
(Int Inst Science Sintering (I I S S), 2018)
In this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under ...
Amperometric glucose sensor based on the glucose oxidase enzyme immobilized on graphite rod electrode modified with Fe3O4-CS-Au magnetic nanoparticles
(Springer Heidelberg, 2018)
In this report, an amperometric detection method for blood glucose level was developed benefiting from glucose oxidase (GO) enzyme immobilization on nanoparticle modified graphite rod (GR) electrode. Fe3O4-CS-Au magnetic ...
The Effect of Fiberboard Modification on Adhesion Strength to Polyvinyl Chloride (PVC) Sheets or Eastern Beech (Fagus orientalis L.) Veneers
(North Carolina State Univ Dept Wood & Paper Sci, 2018)
The adhesion strength was evaluated for polyvinyl chloride (PVC) and Eastern beech (Fagus orientalis L.) veneers glued onto specially produced fiberboards using urea-formaldehyde (UF), polyvinyl acetate (PVAc), and ...
Adaptive arrangement of cyclic prefix length for MC-CDMA systems via multi-objective bat algorithm
(Springer London Ltd, 2018)
Multi-carrier multiplexing systems, used in high bit rate communication applications, are more affected by the time- or frequency-dependent fading effects incurring in the channel than the single-carrier systems. When the ...
Synthesis of amine-functionalized methacrylic acid-g-poly(ethylene terephthalate) fiber and its Congo red removal ability
(Springer, 2018)
The two kinds of amine-type adsorbents were synthesized by reacting hexamethylenediamine (HMDA) and tetraethylenepentamine (TEPA) with methacrylic acid-g-poly(ethylene terephthalate) (MAA-g-PET) fiber for the removal of ...
Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
(Gazi Univ, 2020)
In this study, 7075 grade aluminum-based composites reinforced with SiC (silicon carbide) and B4C (boron carbide) were produced with powder metallurgy at 40%, 20% and 10% reinforcement ratios. The mechanical properties of ...
Half-space albedo problem for Inonu, linear and quadratic anisotropic scattering
(Korean Nuclear Soc, 2020)
This study is concerned with the investigation of the half-space albedo problem for "Inonu-linearquadratic anisotropic scattering" by the usage of Modified FN method. The method is based on Case's method. Therefore, Case's ...