Ara
Toplam kayıt 15, listelenen: 1-10
Behaviour Of Reinforced Concrete Weak Column-Beam Connections
(Gazi Univ, Fac Engineering Architecture, 2014)
In this study the behavior of RC weak column-beam connections which have no joint stirrups and lack of column stirrups, are investigated experimentally under earthquake loads. Edge beam to column joints were tested under ...
Discussion on "Seismic capacity of masonry infilled RC frame strengthening with expanded metal ferrocement" by A. Leeanansaksiri, P. Panyakapo, A. Ruangrassamee [Eng. Struct. 159 (2018) 110-127]
(Elsevier Sci Ltd, 2018)
A discussion on the paper by Leeanansaksiri et al. (2018) is presented. In the paper, strengthening of the masonry infill walls using ferrocement reinforced with standard expanded steel plates (EMS) was investigated ...
Recommendations for calculation of strengthened brick walls with perforated plates
(Gazi Univ, Fac Engineering Architecture, 2019)
There are many studies relating to the strengthening of infill brick walls, which contribute partially to the resistance against the seismic forces, by using different methods and materials to make them behave similarly ...
Strengthening Of Plastered Hollow Brick Infill Walls Using Strip Concrete/Reinforced Concrete Panels
(Gazi Univ, Fac Engineering Architecture, 2014)
In Turkey, majority of the building stock is known to be inadequate against earthquake and is required to be strengthened. Cast-in-place reinforced concrete (RC) infill walls, connected to the frame systems by use of epoxy ...
New Experimental Setup for Seismic Testing of Exterior RC Beam-Column Joints
(Amer Soc Testing Materials, 2015)
Exterior beam-column joints are commonly tested to investigate the influence of different strengthening and repair techniques on the seismic performances of RC structures. All of the internal forces developing at the ends ...
Behaviour of brick infill walls strengthened with expanded steel plates
(Springer, 2016)
The present study was dedicated to investigate an effective, economical and convenient method for strengthening brick infill walls, i.e. the use of externally-bonded expanded steel plates. A total of 30 plastered wall ...
Lateral stability of reinforced-concrete beams with initial imperfections
(Ice Publishing, 2016)
The paper presents the results of an analytical study aimed at investigating the lateral stability of reinforced-concrete (RC) beams with initial geometric imperfections. Based on the experimental results in the literature, ...
Flexural strengthening and repair of RC slabs by adding a new RC layer
(Ernst & Sohn, 2016)
The present paper summarizes the findings of an experimental programme to investigate a strengthening/repair technique through the introduction of a new RC layer to an existing slab. Six RC slabs, composed of twelve ...
Behavior and strength of hidden Rc beams embedded in slabs
(ELSEVIER, 2020)
Reinforced concrete (RC) beams protrude from the ceiling, unless there is an infill wall beneath. Sometimes the construction of these beams is avoided due to aesthetic concerns, and instead a reinforcement arrangement with ...
Strengthening and Repair of Reinforced Concrete Beams Using External Steel Plates
(Asce-Amer Soc Civil Engineers, 2013)
The study presents the results of an experimental program aimed at investigating the flexural behavior of externally plated RC beams. A total of 13 full-scale rectangular RC beams were tested. The effects on the behavior ...