Ara
Toplam kayıt 85, listelenen: 11-20
Investigatıon Of Mechanical Properties Of Carbon Fibre/Epoxy Composites Incorporating Nanoclay And Multi Walled Carbon Nanotube
(Serban Solacolu Foundation, 2017)
This study was conducted for the purpose of examining the mechanical relations of the multi-walled carbon nanotube (MWCNT) and the nanoclay (NC) with each other on the carbon fiber composite materials. Samples were prepared ...
The effect of ethanol-gasoline blends on performance and exhaust emissions of a spark ignition engine through exergy analysis
(Pergamon-Elsevier Science Ltd, 2017)
Ethanol which is considered as an environmentally cleaner alternative to fossil fuels is used on its own or blended with other fuels in different ratios. In this study, ethanol which has high octane rating, low exhaust ...
Investigation of the effects of gasoline and CNG fuels on a dual sequential ignition engine at low and high load conditions
(Elsevier Sci Ltd, 2018)
In this study, a dual sequential spark ignition engine is separately tested either with gasoline or CNG at low and high loads. In addition, numerical engine analyses are performed by constructing a 1-D engine model in ...
Experimental modal analysis of curved composite beam with transverse open crack
(Academic Press Ltd- Elsevier Science Ltd, 2018)
Curved composite beams are the most widely preferred structures due to their high strength, low weight, corrosion and heat resistance. The aim of this study is to examine the modalities and natural frequencies of curved ...
Investigation of structural and tribological properties o layers formed in SAE 5140 steel coated with boride powders
(Amer Scientific Publishers, 2018)
In this study, the surface of SAE 5140 steel was coated with ferroboron using new powder bonding agent (Baybora-1) for various bonding time at 950 degrees C. The chemical composition and morphology of the phases formed in ...
Initial Results of Testing a Multilayer Laser Scanner in a Collision Avoidance System for Light Rail Vehicles
(Mdpi, 2018)
This paper presents an application to detect and track obstacles using a multilayer laser scanner. The goal of the detection system is to develop collision avoidance for the Light Rail Vehicle (LRV). The laser scanner, ...
Numerical Analysis of Cooling Down a Micro ATX Computer Chassis
(Kaunas Univ Technol, 2018)
The technological development in the current environment is in line with the development of computer technologies. Therefore, operation loads of computer processors and capacities and processors and other electronic circuit ...
A statistical design optimization study of a multi-chamber reactive type silencer using simplex centroid mixture design
(Sage Publications Ltd, 2021)
This study aims to optimize the acoustic performance of a silencer with baffles having extension tubes. It considers the position, the number and the extension geometry of the baffles as design variables and sound transmission ...
Revision of the failed pedicle screw in osteoporotic lumbar spine: Biomechanical comparison of kyphoplasty versus transpedicular polymethylmethacrylate augmentation
(Turkish Joint Diseases Foundation, 2012)
Objectives: In this study, we aimed to compare of kyphoplasty versus transpedicular polymethylmethacrylate (PMMA) augmentation biomechanically in the revision of the failed pedicle screw in osteoporotic lumbar spine. ...
Numerical Analysis Of Cooling An Electronic Circuit Component With Cross Flow And Jet Combination
(Cambridge Univ Press, 2019)
In this study, cooling of a constant temperature cube that represents electronic components inserted inside a channel are investigated. For this purpose, primary air with constant velocity is transferred from channel input, ...