Ara
Toplam kayıt 86, listelenen: 1-10
Detection of defects in a cantilever beam using modal test data
(2004)
Bu çalışmanın amacı çatlaklı kirişlerde hasar yeri ve derinliği hakkında bilgi edinmektir. Bu amaçla kirişte darbe vuruşu sonucu oluşan titreşimler incelenmiştir. Hasarlı ve hasarsız kirişlerden elde edilen sinyal hem zaman ...
Process unification and frame preparation of machining parametres for rotational parts
(2005)
Geleneksel veya bilgisayarlı tezgahların kullanıldığı her hangi bir metal işleme ünitesi, üretilecek parçanın prototipine, teknik çizimine veya bir veri tabanına ihtiyaç duyar. Geleneksel üretim ünitesindeki tasarım, işlem ...
A comparative study on the stress intensity factor of carbon epoxy composite plates having central holes
(2000)
Makalede standart olmayan ince kompozit levhaların gerilme şiddeti faktörlerinin (GŞF) hesaplanmasıyla ilgili karşılaştırmalı bir çalışma sunulmaktadır. Çalışmada Karbon-Epoksi kompozit levhalar kullanılmıştır. Çentiksiz ...
Failure analysis of trapezium shaped carbon-epoxy plate pinned-joint
(2000)
Bu çalışmanın amacı, içinde pim bulunan yamuk şekilli, karbon-epoksi kompozitinin yırtılma mukavemetini ve modunu araştırmaktır. Yırtılma yükü ve modu nümerik olarak analiz edildi. Nümerik metod iki adım içerir: İlk olarak ...
Determination of the deflection function of a composite cantilever beam using theory of anisotropic elasticity
(2001)
In this paper, deflection function of an orthotropic cantilever beam subjected to point and distributed load are obtained using anisotropic elasticity. The deflections at the free end of the beam are calculated numerically ...
The importance of mesh modeling in the calculation of stress intensity factor
(2001)
In this paper, stress intensity factor (SIF) of an infinite plate with a center notched hole is calculated by means of finite element method (FEM) using both triangular quadratic element (TQE) and triangular quarter point ...
Heat transfer to a power-law fluid in arbitrary cross-sectional ducts
(2002)
Numerical solutions for laminar heat transfer of a non-Newtonian fluid in the thermal entrance region for triangular, square, sinusoidal, etc. ducts are presented for constant wall temperature. The continuity equation and ...
Statistical analysis of fracture strength of composite materials using Weibull distribution
(2002)
In this study, the fracture strength of a carbon-epoxy composite plate has been statistically analysed by Weibull distribution. Nineteen tension tests were carried out. The results obtained vary between 439 MPa and 552 ...
A new method for extracting 3D solid models of objects using 2D technical drawings
(2007)
In this study, a new method called "3D-Space" have been developed to obtain 3D models of prismatic machine parts using 2D technical drawings. The algorithm basicaly works in the following manner: 3 basic views (i.e. top, ...