Ara
Toplam kayıt 82, listelenen: 1-10
Detection of defects in a cantilever beam using modal test data
(2004)
Bu çalışmanın amacı çatlaklı kirişlerde hasar yeri ve derinliği hakkında bilgi edinmektir. Bu amaçla kirişte darbe vuruşu sonucu oluşan titreşimler incelenmiştir. Hasarlı ve hasarsız kirişlerden elde edilen sinyal hem zaman ...
Process unification and frame preparation of machining parametres for rotational parts
(2005)
Geleneksel veya bilgisayarlı tezgahların kullanıldığı her hangi bir metal işleme ünitesi, üretilecek parçanın prototipine, teknik çizimine veya bir veri tabanına ihtiyaç duyar. Geleneksel üretim ünitesindeki tasarım, işlem ...
The importance of mesh modeling in the calculation of stress intensity factor
(2001)
In this paper, stress intensity factor (SIF) of an infinite plate with a center notched hole is calculated by means of finite element method (FEM) using both triangular quadratic element (TQE) and triangular quarter point ...
Heat transfer to a power-law fluid in arbitrary cross-sectional ducts
(2002)
Numerical solutions for laminar heat transfer of a non-Newtonian fluid in the thermal entrance region for triangular, square, sinusoidal, etc. ducts are presented for constant wall temperature. The continuity equation and ...
Statistical analysis of fracture strength of composite materials using Weibull distribution
(2002)
In this study, the fracture strength of a carbon-epoxy composite plate has been statistically analysed by Weibull distribution. Nineteen tension tests were carried out. The results obtained vary between 439 MPa and 552 ...
A new method for extracting 3D solid models of objects using 2D technical drawings
(2007)
In this study, a new method called "3D-Space" have been developed to obtain 3D models of prismatic machine parts using 2D technical drawings. The algorithm basicaly works in the following manner: 3 basic views (i.e. top, ...
Data extraction from CAD model for rotational parts to be machined at turning centres
(Scientific and Technical Research Council of Turkey, Ankara, Turkey, 1999)
Among the most important data produced and stored is product data. CAD data forms one of many contributors to product data. Although in most circumstances CAD data can be processed within the CIM environment by integrated ...
Investigatıon Of Mechanical Properties Of Carbon Fibre/Epoxy Composites Incorporating Nanoclay And Multi Walled Carbon Nanotube
(Serban Solacolu Foundation, 2017)
This study was conducted for the purpose of examining the mechanical relations of the multi-walled carbon nanotube (MWCNT) and the nanoclay (NC) with each other on the carbon fiber composite materials. Samples were prepared ...
The effect of ethanol-gasoline blends on performance and exhaust emissions of a spark ignition engine through exergy analysis
(Pergamon-Elsevier Science Ltd, 2017)
Ethanol which is considered as an environmentally cleaner alternative to fossil fuels is used on its own or blended with other fuels in different ratios. In this study, ethanol which has high octane rating, low exhaust ...
Multivariate statistical methods for detection of spur gear faults
(Sage Publications Ltd, 2015)
In this study, multivariate statistical techniques are experimented for a spur gear system and a methodology is proposed. The approach is based on the analysis of multidimensional gear vibration data without any feature ...