| dc.contributor.author | Aktas, A | |
| dc.contributor.author | Dirikolu, MH | |
| dc.date.accessioned | 2020-06-25T17:40:05Z | |
| dc.date.available | 2020-06-25T17:40:05Z | |
| dc.date.issued | 2004 | |
| dc.identifier.citation | closedAccess | en_US |
| dc.identifier.issn | 0266-3538 | |
| dc.identifier.uri | https://doi.org/10.1016/j.compscitech.2003.11.005 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12587/3254 | |
| dc.description | WOS: 000222231700017 | en_US |
| dc.description.abstract | An experimental and numerical study has been carried out to investigate the strength of a pinned-joint carbon epoxy composite plate with [0degrees/45degrees/-45degrees/90degrees]s and [90degrees/45degrees/-45degrees/0degrees]s stacking configurations. The experiments were carried out according to the ASTM D953 standard [Standard Test method for Bearing Strength of Plastics, ASTM Designation, 342-346], and the numerical analyses were performed by the finite element method. The ratio of the edge distance to the pin diameter (E/D), and the ratio of the specimen width to the pin diameter (W/D) were systematically varied during analyses. The results from both analyses show firstly that the prepared specimen configurations give bearing mode, secondly that the [90degrees/45degrees/-45degrees/0degrees]s configuration is stronger when compared to [0degrees/45degrees/-45degrees/90degrees]s, and finally that both configurations reach their upper limit bearing strengths when E/D and W/D ratios are equal or greater than 4. (C) 2004 Elsevier Ltd. All rights reserved. | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Elsevier Sci Ltd | en_US |
| dc.relation.isversionof | 10.1016/j.compscitech.2003.11.005 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | carbon fibres | en_US |
| dc.subject | mechanical properties | en_US |
| dc.subject | failure criterion | en_US |
| dc.subject | finite element analysis | en_US |
| dc.subject | joining | en_US |
| dc.title | An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates | en_US |
| dc.type | article | en_US |
| dc.contributor.department | Kırıkkale Üniversitesi | en_US |
| dc.identifier.volume | 64 | en_US |
| dc.identifier.issue | 10-11 | en_US |
| dc.identifier.startpage | 1605 | en_US |
| dc.identifier.endpage | 1611 | en_US |
| dc.relation.journal | Composites Science And Technology | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
