dc.contributor.author | Kilic, Murat | |
dc.date.accessioned | 2020-06-25T18:13:01Z | |
dc.date.available | 2020-06-25T18:13:01Z | |
dc.date.issued | 2015 | |
dc.identifier.issn | 1930-2126 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12587/6104 | |
dc.description | Kilic, Murat/0000-0001-6113-8634 | en_US |
dc.description | WOS: 000364199800133 | en_US |
dc.description.abstract | In this study, samples were subjected to the following surface treatment techniques: sawing with a circular saw, planing with a thickness machine, and sanding with a sanding machine (with No. 80 sandpaper). After samples were treated radially and tangentially with machines, their surface roughness values (R-a, R-y, and R-z) were measured according to ISO 4288. When statistics related to surface roughness values (for R-a, R-y, and R-z) were analyzed, it was found that surfaces processed with the thickness machine exhibited the smoothest surfaces. Also, according to the same statistical tables, the lowest surface roughness values were found for surfaces cut tangentially. | en_US |
dc.description.sponsorship | Turkey General Directorate of Forestry, Central Anatolia Forestry Research InstituteMinistry of Forestry & Water Affairs - Turkey [23.7133/2009-2011-2013] | en_US |
dc.description.sponsorship | The author is grateful for the support of the Turkey General Directorate of Forestry, Central Anatolia Forestry Research Institute, Grant. No. 23.7133/2009-2011-2013. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | North Carolina State Univ Dept Wood & Paper Sci | en_US |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Surface roughness | en_US |
dc.subject | Pinus nigra Arnold wood | en_US |
dc.subject | Wood machining | en_US |
dc.subject | Cutting directions | en_US |
dc.title | Effects of Machining Methods on the Surface Roughness Values of Pinus nigra Arnold Wood | en_US |
dc.type | article | en_US |
dc.contributor.department | Kırıkkale Üniversitesi | en_US |
dc.identifier.volume | 10 | en_US |
dc.identifier.issue | 3 | en_US |
dc.identifier.startpage | 5554 | en_US |
dc.identifier.endpage | 5562 | en_US |
dc.relation.journal | Bioresources | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |