Ara
Toplam kayıt 40, listelenen: 31-40
Investigation of Leaching Kinetics of Ulexite Waste in Oxalic Acid Solutions
(Croatian Soc Chemical Engineering Technology, 2014)
The dissolution of ulexite waste in oxalic acid solutions was studied in a batch reactor after characterization of the waste by X-ray diffiaction (XRD) analysis and X-ray fluorescence (XRF) analysis. The dissolution ...
Investigation of abrasion in Al-MgO metal matrix composites
(Pergamon-Elsevier Science Ltd, 2014)
In this study, the effects of reinforcement volume fractions on abrasive wear behavior were examined in Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement - volume ratios produced by melt-stirring. ...
The study of MIG weldability of heat-treated aluminum alloys
(Springer London Ltd, 2013)
In this article, Metal Inert Gas (MIG) weldability of commercially received and aged samples of 6061-T-6 and 7075-T-651 aluminum alloys was investigated. The welding joints were prepared in ten different combinations. ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method
(Sage Publications Ltd, 2011)
In this study, the effects of the reinforcement volume fraction on the abrasive wear behaviour of reinforced MgO composites produced by the vacuum infiltration method with 5, 10, and 15 vol% of the volume fraction of Al ...
Effects Of Sintering, Ageing And Cryogenic Treatments On Structural And Mechanical Properties Of Aa2014-B4c Composite
(Gazi Univ, Fac Engineering Architecture, 2013)
In this study, powders of gas atomized AA2014 and solid B4C were mixed and then used in an infiltration system. To attain particulate reinforced aluminum composites, fine particles of B4C were added in right proportions ...
Effect of matrix temperature and powder size on the infiltration height of SiO2 -reinforced Al 7075 matrix composites produced by vacuum infiltration
(Adcotec Ltd, 2011)
In this study, Al-MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement-volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix ...
An investigation of surface quality of turning in al matrix mgo reinforced composite material
(Gazi Univ, Fac Engineering Architecture, 2011)
In this study; Al/MgO composites having 5 %, 10 %, 15 % volume fraction of reinforcement are produced by vacuum infiltration method and microstructure of composites are determined. Produced materials of metal matrix composite ...
Effect of Reinforcement Volume Ratio on Thermal Conductivity of SiO2 Reinforced Al Matrix Composite Produced by Vacuum Infiltration Method
(Asian Journal Of Chemistry, 2010)
In this study, SiO2 powders with 105 mu m particle size were filled in quartz tubes freely to form 30, 40, 50% reinforcement volume ratios. Liquid A17075 alloy was vacuum infiltrated into the SiO2 compact under the same ...