Ara
Toplam kayıt 56, listelenen: 1-10
Effect of Cu addition on microstructure and mechanical properties of NiTi based shape memory alloy
(2018)
In this research paper, pre-alloyed NiTi based shape memory alloy and 4%Cu were used asstarting powder materials. Starting powder materials were blended for 60 minutes by a turbulamixer. After mix processing, microstructure ...
Effect of powder size on infiltration height in producing MgO reinforced Al matrix composite by vacuum infiltration method
(Trans Tech Publications Ltd, 2007)
The vacuum infiltration method is one of the composite producing methods. There are several parameters in composite production by vacuum infiltration. One of them is particle size of reinforcement in particulate reinforced ...
Effect of Reinforcement Volume Ratio on Thermal Conductivity of SiO2 Reinforced Al Matrix Composite Produced by Vacuum Infiltration Method
(Asian Journal Of Chemistry, 2010)
In this study, SiO2 powders with 105 mu m particle size were filled in quartz tubes freely to form 30, 40, 50% reinforcement volume ratios. Liquid A17075 alloy was vacuum infiltrated into the SiO2 compact under the same ...
An investigation of surface quality of turning in al matrix mgo reinforced composite material
(Gazi Univ, Fac Engineering Architecture, 2011)
In this study; Al/MgO composites having 5 %, 10 %, 15 % volume fraction of reinforcement are produced by vacuum infiltration method and microstructure of composites are determined. Produced materials of metal matrix composite ...
Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber
(Elsevier Sci Ltd, 2015)
Autoclaved aerated concrete (MC) is a construction material obtained by being pore-forming of the mixture prepared with finely crushed siliceous aggregate lime, water and limestone with the addition of aluminum powder and ...
An Investigation of Abrasive Wear Behaviour of Al 2014-SiC Composites
(Walter De Gruyter Gmbh, 2015)
In this study, the effects of SiC reinforcement volume fractions on hardness, porosity and abrasive wear behaviour were examined in Al 2014-SiC (<92.3 mu m) reinforced metal matrix composites (MMCs) of 3%, 6% and 12% ...
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
Investigating the effect of porosity level and pore former type on the mechanical and corrosion resistance properties of agro-waste shaped porous alumina ceramics
(Elsevier Sci Ltd, 2017)
The strength integrity and chemical stability of porous alumina ceramics operating under extreme service conditions are of major importance in understanding their service behavior if they are to stand the test of time. In ...
Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration
(Walter De Gruyter Gmbh, 2017)
In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and ...
The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds
(Mdpi, 2018)
The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, ...