Ara
Toplam kayıt 43, listelenen: 31-40
AZ91 magnezyum alaşımının sol-jel yöntemiyle hidroksiapatit kaplanması
(2017)
Bu çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik ...
Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber
(Elsevier Sci Ltd, 2015)
Autoclaved aerated concrete (MC) is a construction material obtained by being pore-forming of the mixture prepared with finely crushed siliceous aggregate lime, water and limestone with the addition of aluminum powder and ...
Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
(Korean Assoc Crystal Growth, Inc, 2014)
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts ...
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6XXX and 7XXX Aluminum Alloys
(Springer, 2014)
The effect of aging treatment on the surface roughness and mechanical properties of AA6061 and AA7075 alloys was studied. Microhardness and tensile tests were used to investigae the mechanical properties. X-ray diffraction ...
Investigation of Leaching Kinetics of Ulexite Waste in Oxalic Acid Solutions
(Croatian Soc Chemical Engineering Technology, 2014)
The dissolution of ulexite waste in oxalic acid solutions was studied in a batch reactor after characterization of the waste by X-ray diffiaction (XRD) analysis and X-ray fluorescence (XRF) analysis. The dissolution ...
Investigation of abrasion in Al-MgO metal matrix composites
(Pergamon-Elsevier Science Ltd, 2014)
In this study, the effects of reinforcement volume fractions on abrasive wear behavior were examined in Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement - volume ratios produced by melt-stirring. ...
The study of MIG weldability of heat-treated aluminum alloys
(Springer London Ltd, 2013)
In this article, Metal Inert Gas (MIG) weldability of commercially received and aged samples of 6061-T-6 and 7075-T-651 aluminum alloys was investigated. The welding joints were prepared in ten different combinations. ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method
(Sage Publications Ltd, 2011)
In this study, the effects of the reinforcement volume fraction on the abrasive wear behaviour of reinforced MgO composites produced by the vacuum infiltration method with 5, 10, and 15 vol% of the volume fraction of Al ...