Sevim, OzerSengul, Cagri GoktugKartal, SaruhanToklu, KenanCaglar, Yasin2025-01-212025-01-2120230090-39731945-7553https://doi.org/10.1520/JTE20220332https://hdl.handle.net/20.500.12587/24588This study investigated the effect of the mechanical and durability properties of cementitious composite systems with supplementary cementitious materials (SCMs), including fly ash (FA), ground granulated blast furnace slag (GGBS), and bottom ash (BA), with similar specific surface areas (similar to 3,300 cm2/g). FA, GGBS, and BA were ground to a specific surface area of similar to 3,300 cm2/g (about the cement-specific surface area) and then replaced with cement at 5 %, 10 %, 15 %, and 20 % replacement ratios. The compressive strength, flexural strength, length change, and rapid chloride ion permeability of the cementitious composites incorporating FA, GGBS, and BA with similar specific surface areas were recorded after 7-, 28-, and 90-day curing periods. As a result, cementitious composites containing GGBS improved the mechanical and durability properties at the maximum rate. It was shown that the properties of cementitious composites containing 20 % GGBS yielded better results than the control specimens without any SCMs.eninfo:eu-repo/semantics/closedAccesscementitious composites; specific surface area; Blaine fineness; compressive and flexural strength; rapid chloride ion permeabilityEffect of Supplementary Cementitious Materials with Similar Specific Surface Area on Cementitious Composite SystemsArticle5152971298510.1520/JTE20220332WOS:000935308800001Q4