Konu "hardness" için Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed listeleme
Toplam kayıt 11, listelenen: 1-11
-
A comparative study of lubricated friction and wear behaviour of Al-25Zn-3Cu-3Si bearing alloy
(Sage Publications Ltd, 2014)Lubricated friction and wear behaviour of Al-25Zn-3Cu-3Si alloy was investigated on a block-on-disc test machine in comparison with 60/40 brass and SAE 65 bronze. T6 heat treatment increased the hardness, strength and wear ... -
Effect of agro-waste pore formers on the microstructure, hardness, and tensile properties of porous alumina ceramics
(Wiley, 2018)This study demonstrates a simple and economically viable approach to fabricate porous alumina ceramics shaped with low-priced natural organic pore-forming agents (PFAs) from rice husk (RH) and sugarcane bagasse (SCB) of ... -
The Effect of Solid Boriding Time on the Structure, Hardness and Corrosion Properties of AISI 5140 Steel
(MAIK NAUKA/INTERPERIODICA/SPRINGER, 2020)In this study, AISI 5140 steel samples were borided in an electrical furnace at a temperature of 950 degrees C for 4, 6 and 8 h. Structural examinations, hardness measurement and corrosion tests were performed to determine ... -
Effects Of The Boriding Process And Of Quenching And Tempering After Boriding On The Microstructure, Hardness And Wear Of AISI 5140 Steel
(WORLD SCIENTIFIC PUBL CO PTE LTD, 2020)An investigation was made on the effects of the boriding process and of quenching and tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel. In this study, a new boriding agent (Baybora (R)-1) ... -
Effects of water quality and fish size on toxicity of methiocarb, a carbamate pesticide, to rainbow trout
(Elsevier, 2006)The acute toxicity of methiocarb in juvenile rainbow trout (Oncorhynchus mykiss, 3.25 +/- 0.79 g) was evaluated in glass aquaria under static conditions. Nominal concentrations of methiocarb in the toxicity test ranged ... -
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ... -
Some Properties of Densified Eastern Redcedar as Function of Heat and Pressure
(Mdpi Ag, 2017)The objective of this study was to evaluate some of the properties of densified eastern redcedar as function of temperature and pressure. Surface quality, adhesive bondline shear strength, hardness, and color changes of ... -
Surface Roughness of Composite Panels as a Quality Control Tool
(Mdpi, 2018)This paper describes a study of the quantify surface roughness of experimentally manufactured particleboards and sandwiched panels having fibers on the surface layers. Surface quality of specimens before and after being ... -
Tailored pore structures and mechanical properties of porous alumina ceramics prepared with corn cob pore-forming agent
(WILEY, 2021)In this work, the effects of porosity and different particle sizes of pore-forming agent on the mechanical properties of porous alumina ceramics have been reported. Different grades of porous alumina ceramics were developed ... -
Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness
(Elsevier Sci Ltd, 2007)In this study, the relationship between vibration and tool wear was investigated during end milling. For this purpose, a series of experiment were conducted in a vertical milling machine. An indexable CBN insert and AISI ... -
Water quality and fish size affect toxicity of endosulfan, an organochlorine pesticide, to rainbow trout
(Pergamon-Elsevier Science Ltd, 2006)The acute toxicity of endosulfan in juvenile rainbow trout (Oncorhynchus mykiss, 10.61 +/- 1.69 g) was evaluated in glass aquaria under static conditions. Nominal concentrations of endosulfan in the toxicity test ranged ...