Yayıncı "Elsevier Science Sa" Makale Koleksiyonu için listeleme
Toplam kayıt 17, listelenen: 1-17
-
Capacitive detection of single bacterium from drinking water with a detailed investigation of electrical flow cytometry
(Elsevier Science Sa, 2018)Pathogenic contamination of drinking water is critical in regard to human health. In this study, we investigated the electrical detection of single bacterium from drinking water. A microfluidics chip consisting of ... -
Comparison of thermally induced and deformation induced martensite in Fe-29% Ni-2% Mn alloy
(Elsevier Science Sa, 2007)The morphology and crystallography of maitensite either formed by cooling to subzero temperatures (thermal effect) or by compression deformation were compared for different austenite grain sizes of Fe-29% Ni-2% Mn alloy ... -
Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys
(Elsevier Science Sa, 2004)In this systematic study, dispersion-strengthening effect of the Cu-25.91Mn (wt.%), Cu-26.62Mn-8.99Al (wt.%), Cu-22.17Mn-12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature ... -
Effect of annealing period on the resistive transitions and AC losses in a Bi1.6Pb0.4Sr2Ca3Cu4O12 superconductor fabricated by a wet technique
(Elsevier Science Sa, 2000)We estimated the irreversibility lines from the resistive-superconducting transition in DC magnetic fields up to 1 T for the Bi1.6Pb0.4Sr2Ca3Cu4O12 superconducting samples prepared by liquid ammonium nitrate with the same ... -
Effect of Mo on the magnetic properties of martensitic phase in Fe-Ni-Mo alloys
(Elsevier Science Sa, 2006)The paramagnetic-magnetically ordered transition and the effect of Mo content on the magnetic properties of martensite phase in Fe-30% Ni-x% Mo alloys have been investigated by AC susceptibility and Mossbauer spectroscopy. ... -
Effects of homogenization time on the both martensitic transformations and mechanical properties of Fe-Mn-Si-Cr-Ni shape memory alloy
(Elsevier Science Sa, 2007)In this work, we have investigated some physical and mechanical properties of martensitic transformation in Fe-12.5%Mn-5.5%Si-9%Cr-3.5%Ni (wt) shape memory alloy. Compressive deformation at room temperature, which applied ... -
Effects of substrate temperature and post-deposition anneal on properties of evaporated cadmium telluride films
(Elsevier Science Sa, 2007)The effects of substrate temperature and post-deposition heat treatment steps on the morphology, structural, optical and electrical properties of thin film CdTe layers grown by vacuum evaporation were investigated. Scanning ... -
The effects of zinc nitrate, zinc acetate and zinc chloride precursors on investigation of structural and optical properties of ZnO thin films
(Elsevier Science Sa, 2008)ZnO thin films were prepared using zinc chloride, zinc acetate and zinc nitrate precursors by spray pyrolysis technique oil glass substrates at 550 degrees C. Structural and optical properties of ZnO films were investigated ... -
Electron microscopy study of 2H and 18R martensites in Cu-11.92 wt% A1-3.78 wt% Ni shape memory alloy
(Elsevier Science Sa, 2006)The microstructures and the crystal structures of the beta(1)' and gamma(1)' martensite phases in Cu-11.92 wt% Al-3.78 wt% Ni shape memory alloy were studied by scanning electron microscopy (SEM) and transmission electron ... -
Formation and magnetic properties of butterfly-shaped martensite in an Fe-Ni-Cr alloy
(Elsevier Science Sa, 2006)The butterfly-shaped martensitic transformation has been examined by means of transmission electron microscope (TEM) and the magnetic properties of the alloy have been studied by using Mossbauer spectroscopy in an ... -
Hardness and microstructural analysis of Bi1.6Pb0.4Sr2Ca2−xSmxCu3Oy polycrystalline superconductors
(Elsevier Science Sa, 2006)Bi1.6Pb0.4Sr2Ca2-xSmxCu3Oy superconductors with nominal substitution parameters x = 0.0, 0.001, 0.005, and 0.1 were prepared by the conventional solid-state reaction powder compacting method. The effects of Sm substitution ... -
Micro-structural analysis of self-accommodating martensites in Cu-11.92 wt%Al-3.78 wt%Ni shape memory alloy
(Elsevier Science Sa, 2008)Morphologies and configurations of the self-accommodating martensites in Cu-11.92 wt%Al-3.78wt%Ni shape memory alloy were studied by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). ... -
Microstructural analysis of thermally induced and deformation induced martensitic transformations in Fe-12.5 wt.% Mn-5.5 wt.% Si-9 wt.% Cr-3.5 wt.% Ni alloy
(Elsevier Science Sa, 2006)Martensitic transformations induced by thermally and compression deformation at room temperature in Fe-12.5 wt.% Mn-5.5 wt.% Si-9 wt.% Cr-3.5 wt.% Ni alloy were studied in detail by scanning electron microscopy (SEM) and ... -
Synthesis and characterization of spray pyrolysis Zinc Oxide microrods
(Elsevier Science Sa, 2007)Zinc Oxide (ZnO) microrods were prepared by ultrasonic spray pyrolysis technique on glass substrates. The X-ray diffraction (XRD) patterns and scanning electron microscope images show that obtained rods are composed of ... -
Tape'n roll inertial microfluidics
(Elsevier Science Sa, 2019)Particle focusing and separation in microfluidic devices are critical for biological and medical applications. Inertial microfluidics is used for high throughput bio-particle focusing and separation. Most of the inertial ... -
Temperature dependence of ZnO rods produced by ultrasonic spray pyrolysis method
(Elsevier Science Sa, 2007)Zinc oxide (ZnO) microrods were prepared at different substrate temperatures by ultrasonic spray pyrolysis technique on glass substrates. The X-ray diffraction patterns show that obtained rods are composed of wurtzite-type ... -
A versatile plug microvalve for microfluidic applications
(Elsevier Science Sa, 2017)Most of the available microvalves include complicated fabrication steps and multiple materials. We present a microvalve which is inspired from macroplug valves. The plug microvalve is fabricated by boring a hole through a ...