Yayıncı "North Carolina State Univ Dept Wood & Paper Sci" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 7, listelenen: 1-7
-
Effect of Densification Temperature and Some Surfacing Techniques on the Surface Roughness of Densified Scots Pine (Pinus sylvestris L.)
(North Carolina State Univ Dept Wood & Paper Sci, 2014)The effects of densification temperature, planing, circular sawing, and sanding on the surface roughness of densified Scots pine using the open-system thermodynamic method were studied. Densification was applied to Scots ... -
The Effect of Densification Temperature on Some Physical and Mechanical Properties of Scots Pine (Pinus sylvestris L.)
(North Carolina State Univ Dept Wood & Paper Sci, 2012)As wood's density increases, strength properties tend to increase due to a decrease in cavity volume. This study aimed to determine the effect of temperature levels in the densification process with an open-system ... -
Effect of Glass Wool and Stone Wool Additives on Some Mechanical Properties of Wood Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2016)Mechanical properties of wood composites made from multiple wood species (50% Crimean pine, 30% Eastern Black Sea oak, 15% quaking aspen, and 5% wood machining residues) were evaluated using various amount of glass wool ... -
Effect on Shear Strength of Machining Methods in Pinus nigra Arnold Bonded with Polyurethane and Polyvinyl Acetate Adhesives
(North Carolina State Univ Dept Wood & Paper Sci, 2016)Specimens taken from Pinus nigra Arnold were subject to surfacing techniques by being cut with a circular saw, planed with a thickness machine, and sanded with a calibrating sanding machine (with P80 grit sandpaper). First, ... -
Effects of Machining Methods on the Surface Roughness Values of Pinus nigra Arnold Wood
(North Carolina State Univ Dept Wood & Paper Sci, 2015)In this study, samples were subjected to the following surface treatment techniques: sawing with a circular saw, planing with a thickness machine, and sanding with a sanding machine (with No. 80 sandpaper). After samples ... -
Effects of Some Mineral Wools and Adhesives on Burning Characteristics of Particleboard
(North Carolina State Univ Dept Wood & Paper Sci, 2015)In this study, effects of adhesive and additive's type and ratio on burning characteristics of particleboard (PB) added glass wool (GW) and rock wool (RW) were researched. PB's furnish was derived from 50% Crimean pine, ... -
Toxicity of Formaldehyde, Polybrominated Diphenyl Ethers (PBDEs) and Phthalates in Engineered Wood Products (EWPs) from the Perspective of the Green Approach to Materials: A Review
(North Carolina State Univ Dept Wood & Paper Sci, 2019)Adhesives, flame-retardant chemicals, and paints are used in engineered wood products (EWPs) to increase some of the properties of wood. Most of the engineered wood composites, including plywood, particleboard, and fiberboard, ...