Basit öğe kaydını göster

dc.contributor.authorCiftci, Hakan
dc.contributor.authorOztekin, Yasemin
dc.contributor.authorTamer, Ugur
dc.contributor.authorRamanaviciene, Almira
dc.contributor.authorRamanavicius, Arunas
dc.date.accessioned2020-06-25T18:12:10Z
dc.date.available2020-06-25T18:12:10Z
dc.date.issued2014
dc.identifier.citationclosedAccessen_US
dc.identifier.issn0039-9140
dc.identifier.issn1873-3573
dc.identifier.urihttps://doi.org/10.1016/j.talanta.2014.03.018
dc.identifier.urihttps://hdl.handle.net/20.500.12587/5772
dc.descriptionTamer, Ugur/0000-0001-9989-6123; Ramanavicius, Arunas/0000-0002-0885-3556en_US
dc.descriptionWOS: 000337866200028en_US
dc.descriptionPubMed: 24881554en_US
dc.description.abstractPoly(3-aminophenylboronic acid), (PAPBA) film was formed on the graphite rod surface by potential cycling. The PAPBA-modified graphite rod (PAPBA/GR) electrode prepared in this way was used for potentiometric fluoride determination. The linear calibration range was from 5 x 10(-4) to 5 x 10(-2) M with the slope of the linear part of the calibration curve of 42.5 mV/log C. No interference effect of the most common ions such as sodium, potassium, chloride, nitrate, iodide, calcium, zinc, aluminum, sulfate and sorbitol was observed during electrochemical determination of fluoride. On the other hand, the PAPBA/GR electrode showed not only good sensitivity and selectivity, but also relatively rapid response to changes of analyte concentrations in the range of 20 s. The sensor was successfully applied for fluoride determination in real sample - toothpaste. (C) 2014 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipLithuanian Scientific Council [TRY-055]en_US
dc.description.sponsorshipThis work was financially supported by Lithuanian Scientific Council, Project number TRY-055.en_US
dc.language.isoengen_US
dc.publisherElsevier Science Bven_US
dc.relation.isversionof10.1016/j.talanta.2014.03.018en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPoly(3-aminophenylboronic acid)en_US
dc.subjectFluorideen_US
dc.subjectPotentiometryen_US
dc.subjectConducting polymeren_US
dc.subjectIon-selective electrodeen_US
dc.titleDevelopment of poly(3-aminophenylboronic acid) modified graphite rod electrode suitable for fluoride determinationen_US
dc.typearticleen_US
dc.contributor.departmentKırıkkale Üniversitesien_US
dc.identifier.volume126en_US
dc.identifier.startpage202en_US
dc.identifier.endpage207en_US
dc.relation.journalTalantaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster