Kırıkkale Meslek Yüksekokulu
Güncel Gönderiler
-
Experimental assessment of a CI engine operating with 1-pentanol/diesel fuel blends
(2020)Alcohols have been known as influential alternatives for the utilization in the compression-ignition (CI) engines. In contrast to lower-order alcohols such as methanol-C1 and ethanol-C2, long-chain alcohols (higher-order ... -
Efficient removal of cationic dyes from aqueous solutions using a modified poly(ethylene terephthalate) fibers adsorbent
(TAYLOR & FRANCIS INC, 2020)A novel adsorbent was synthesized through functionalization of glycidyl methacrylate-g-poly(ethylene terephthalate) (GMA-g-PET) fibers with iminodiacetic acid (IDA) to give IDA-GMA-g-PET fibers. This adsorbent was then ... -
Adsorption of Ag(I) ions from wastewaters using poly(2-aminothiazole): kinetic and isotherm studies
(SPRINGER, 2020)In this study, 2-aminothiazole, (2AT), was polymerized with benzoyl peroxide in 1,4-dioxane solution, and adsorption efficiencies of poly(2-aminothiazole), P-2AT, for the Ag(I) ions to remove from the aqueous solutions ... -
Mechanical And Physical Properties Of Medium Density Fibreboard With Calcite Additive
(SLOVAK FOREST PRODUCTS RESEARCH INST, 2020)In this study, it is investigated that are calcite filler can be used in the production of medium density fiberboard. Chips have been to the process of cooking for 4-5 minutes in Asplund defibrator with the vapor pressure ... -
The investigation of exergoeconomic, sustainability and environmental analyses in an SI engine fuelled with different ethanol-gasoline blends
(INDERSCIENCE ENTERPRISES LTD, 2020)In this study, performance and emission values were obtained under full load by using ethanol-gasoline blends as a fuel at different rates in a spark-ignition engine, and exergy, exergoeconomic and environmental analyses ... -
The Utilizing Rock Salt of Inorganic Filler in Medium Density Fibreboard (MDF) Production
(KASTAMONU UNIV, 2020)Aim of study: To research the usage opportunities of the inorganic rock salt mineral in MDF production. Area of study: The materials were collected rock salt from cankiri region, wood from the Western Black Sea region, ... -
Effect of sintering temperature on pore ratio and mechanical properties of composite structure in nano graphene reinforced ZA27 based composites
(SPRINGER, 2020)Nano graphene platelet (Gr) reinforced nano composites with a zinc-aluminum alloy (ZA27) matrix were produced by powder metallurgy at four different mass ratios (0.5wt%, 1.0wt%, 2.0wt% and 4.0wt%) and three different ... -
Synthesis and characterization of poly(ethylene terephthalate) fibers grafted with N-(hydroxymethyl) acrylamide by free radical: its application in elimination of Congo red
(SPRINGER, 2020)In this study, firstly, N-(hydroxymethyl) acrylamide (HMAAm) was grafted on poly(ethylene terephthalate) fibers (PET) by utilizing benzoyl peroxide (Bz(2)O(2)) as an initiator. The alteration in graft percentage with the ... -
Chemical Analysis of Birch Tree (Betula pendula Roth) Degraded by Fungus
(NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020)The aim of this study was to investigate degraded birch trees (Betula pendula Roth) that suffered from a harmful fungus called Piptoporus betulinus. The main chemical analysis of B. pendula degraded by the fungus, included ... -
A disposable gold-cellulose nanofibril platform for SERS mapping
(ROYAL SOC CHEMISTRY, 2020)In this study, we present a disposable and inexpensive paper-like gold nanoparticle-embedded cellulose nanofibril substrate for the rapid enumeration ofEscherichia coli(E. coli) using surface-enhanced Raman scattering ... -
Synthesis and Crystal Structure Determination of a Dimeric Complex of Dimethylammoniumbis(p-tert-butylcatecholato) borate
(JAPAN SOC ANALYTICAL CHEMISTRY, 2020)The structure of a dimeric complex, namely dimethylammoniumbis{(p-tert-butylcatecholato) borate}, was determined by X-ray crystallography. The compound crystallized in a triclinic system, and was characterized to be in the ... -
Investigation on 1-heptanol as an oxygenated additive with diesel fuel for compression-ignition engine applications: An approach in terms of energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses
(ELSEVIER SCI LTD, 2020)Studies on alternative and environmentally friendly fuels for compression-ignition engines continue intensively. In this work, energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses have been conducted ... -
Partial Range Completeness of Case Eigenfunctions and Numerical Solution of Singular Integral Equations of Particle Transport Problems
(TAYLOR & FRANCIS INC, 2020)We study numerical solution of Singular Integral Equations (SIE) of particle transport theory. We convert them into matrix equations by standard discretization process. It is found that the matrices are highly ill-conditioned ... -
Preparation of single-phase YbB(6)by low-temperature solid-state reaction method using iodine
(SPRINGER, 2020)In this study, low-temperature solid-state synthesis of pure nanocrystalline ytterbium hexaboride (YbB6) employing iodine-based reduction method has been discussed. For the reduction reaction, the mechanically activated ... -
Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO2-reinforced aluminum composites
(SPRINGER HEIDELBERG, 2020)The aim of this study is to reveal how ZrO2(zirconia) contributes to the machinability of aluminum 1050. In the first stage of this study, composite materials were produced by the vortex method by adding different amounts ... -
Mechanical and Formaldehyde-related Properties of Medium Density Fiberboard with Zeolite Additive
(NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI, 2020)Zeolite was investigated as a potential component in the production of medium-density fiberboard (MDF). A mixture of beech (40%), oak (30%), and pine (30%) wood chips was used for fiber production. Chips were cooked for 4 ... -
Half-space albedo problem for Inonu, linear and quadratic anisotropic scattering
(Korean Nuclear Soc, 2020)This study is concerned with the investigation of the half-space albedo problem for "Inonu-linearquadratic anisotropic scattering" by the usage of Modified FN method. The method is based on Case's method. Therefore, Case's ... -
Investigation of Mechanical Properties of B4C / SiC Additive Aluminum Based Composites and Modeling of Their Ballistic Performances
(Gazi Univ, 2020)In this study, 7075 grade aluminum-based composites reinforced with SiC (silicon carbide) and B4C (boron carbide) were produced with powder metallurgy at 40%, 20% and 10% reinforcement ratios. The mechanical properties of ... -
Effect of sintering on mechanical property of SiC/B4C reinforced aluminum
(Iop Publishing Ltd, 2019)In this study, SiC (silicon carbide) and B4C (boron carbide) added Al 7075 based composites were prepared at 40%, 20% and 10% reinforcement ratios. Using powder metallurgy, composite sample with 9 different structures were ... -
Application of 4-VP-g-PET fibers and its N-oxide derivative as an adsorbent for removal of cationic dye
(Springer, 2019)Poly(ethylene terephthalate) fibers (PET) were grafted with 4-vinyl pyridine (4-VP) by a chemical grafting technique, and an N-oxide derivative was synthesized (N-oxide-4-VP-g-PET). The removal of methylene blue (MB) from ...
RSS 1.0
