Bölüm "KKÜ" İnşaat Mühendisliği Bölümü için listeleme
Toplam kayıt 22, listelenen: 1-20
-
Analysis And Comparison Of Long Short-Term Memory Networks Short-Term Traffic Prediction Performance
(FAC TRANSPORT SILESIAN UNIV TECHNOLOGY, 2020)Long short-term memory networks (LSTM) produces promising results in the prediction of traffic flows. However, LSTM needs large numbers of data to produce satisfactory results. Therefore, the effect of LSTM training set ... -
Analysis of the relationship between LSTM network traffic flow prediction performance and statistical characteristics of standard and nonstandard data
(WILEY, 2020)The effectiveness of road traffic control systems can be increased with the help of a model that can accurately predict short-term traffic flow. Therefore, the performance of the preferred approach to develop a prediction ... -
Behavior and strength of hidden Rc beams embedded in slabs
(ELSEVIER, 2020)Reinforced concrete (RC) beams protrude from the ceiling, unless there is an infill wall beneath. Sometimes the construction of these beams is avoided due to aesthetic concerns, and instead a reinforcement arrangement with ... -
Comparison of artificial bee colony and flower pollination algorithms in vehicle delay models at signalized intersections
(SPRINGER LONDON LTD, 2020)Delay is a significant research topic since it includes indicators such as travel quality, lost time and fuel consumption. Furthermore, the delay is used for optimization of traffic control systems and determination of the ... -
Determination of seismic hazard and soil response of a critical region in Turkey considering far-field and near-field earthquake effect
(TECHNO-PRESS, 2020)Evaluation of earthquake impacts in settlements with a high risk of earthquake occurrence is important for the determination of site-specific dynamic soil parameters and earthquake-resistant structural planning. In this ... -
Development of gravitational search algorithm model for predicting packing density of cementitious pastes
(ELSEVIER, 2020)Wet packing approach is recently used to design different kinds of concrete. To achieve an optimal particle packing density, the particles should be chosen in a way to fill the voids between larger particles with smaller ... -
The effect of lane blockage on signalised intersection performance - analysing and modelling
(SAICE-SAISI, 2020)Unexpected stops or entry/exit manoeuvres of vehicles on the road may cause the related lane to become blocked. When this blocking happens in a signalised intersection zone, it also affects intersection performance. ... -
Effects of Mixture Design Parameters on the Mechanical Behavior of High-Performance Fiber-Reinforced Concretes
(ASCE-AMER SOC CIVIL ENGINEERS, 2020)The main purpose of this research is to assess the influence of different design parameters on the mechanical performance of high-performance fiber-reinforced concrete (HPFRC) mixtures. Special attention is also paid to ... -
Engineering plastic gripping mechanism for tension testing of FRP bars
(SAGE PUBLICATIONS LTD, 2020)A new grip adaptor, made of an engineering plastic Cast Polyamide 6 (PA6G), was developed for tension testing of FRP reinforcing bars. The new adaptor offers several advantages over conventional anchors, including the ease ... -
Enhancement on mechanical and durability performances of binary cementitious systems by optimizing particle size distribution of fly ash
(SPRINGERNATURE, 2020)Fly ash is a well-known supplementary cementitious material that is the by-product of coal-fired thermal power plants. The contribution of fly ash to the enhancement of the mechanical and durability properties of cementitious ... -
Gamma ray and neutron shielding characteristics of polypropylene fiber-reinforced heavyweight concrete exposed to high temperatures
(ELSEVIER SCI LTD, 2020)The residual properties of shielding structures need to be redefined after exposure to elevated temperatures due to their probable radiological hazards on biodiversity. In this study, the effect of high temperatures on ... -
Impact behaviour of nanomodified deflection-hardening fibre-reinforced concretes
(ICE PUBLISHING, 2020)The behaviour of concrete under sudden impact loads is complex. Moreover, very little is known about the impact behaviour of high-performance fibre-reinforced concretes (HPFRCs). To account for this, nanomodified ... -
Investigation of the effect of grain size on liquefaction potential of sands
(TECHNO-PRESS, 2020)Due to the permanent damage to structures during earthquakes, soil liquefaction is an important issue in geotechnical earthquake engineering that needs to be investigated. Typical examples of soil liquefaction have been ... -
Investigation on variables affecting bond strength between FRP reinforcing bar and concrete by modified hinged beam tests
(ELSEVIER SCI LTD, 2020)Abstract The bond strength between FRP reinforcement and concrete significantly affects the load bearing capacity and deformation ability of an FRP reinforced concrete member subjected to bending. There are numerous ... -
Mechanical properties and microstructure of cement multicomponent systems containing pozzolan materials under sulfate attack
(STOWARZYSZENIE PRODUCENTOW CEMENTU, 2020)Sulfates are a significant chemical components that may lead to failures of cement concrete composites. The present study is dedicated to analyzing the effects of sulfate on the microstructure of cement composite mortars. ... -
Microstructural, Physical And Mechanical Properties Of Aerated Concrete Containing Fly Ash Under High Temperature And Pressure
(SERBAN SOLACOLU FOUNDATION, 2020)This study analyzed the effects of the use of fly ash as a replacement for the quartz sand on the compressive strength, dry density, moisture content and thermal conductivity of the aerated concrete. Based on the production ... -
Multifunctional smart nanoconcretes
(ELSEVIER SCIENCE BV, 2020)In this chapter, multifunctional smart properties of Engineered Cementitious Composites (ECC) which is a special class of High Performance Fiber Reinforced Cementitious Composites are presented. Main focus is placed on the ... -
Nano-tailored multi-functional cementitious composites
(ELSEVIER SCI LTD, 2020)This paper explores the effects of single and binary use of nano-additions on the self-sensing and self-healing efficiencies of cementitious composites in achieving a material that combines high mechanical and multifunctional ... -
Optimizing of phase plan, sequence and signal timing based on flower pollination algorithm for signalized intersections
(SPRINGER, 2020)The purpose of this study is to develop a control system that optimizes the phase plan, sequence and signal timing using the flower pollination algorithm (FPA). At the same time, it is aimed to improve the fixed-time control ... -
Self-sensing capability of Engineered Cementitious Composites: Effects of aging and loading conditions
(ELSEVIER SCI LTD, 2020)Self-sensing capability of 7-, 28-, 90- and 180-day-old Engineered Cementitious Composites (ECC) incorporated either with carbon fibers (CF/ECC-CF) at micro-scale or multi-walled carbon nanotubes (CNT/ECC-CNT) and carbon ...