Ara
Toplam kayıt 85, listelenen: 41-50
Sliding Friction and Wear Behavior of Pack-Boronized AISI 1050, 4140, and 8620 Steels
(Taylor & Francis Inc, 2008)
This paper describes the dry sliding friction and wear performance of boronized AISI 1050, 4140, and 8620 steels with the Fe(2)B phase coating on the surface. The studies were carried out using a pin-on-disc arrangement. ...
Sea water effect on pinned joint glass fibre composite materials
(Elsevier Sci Ltd, 2008)
The effect of sea water on the bearing strength behavior of the woven glass fibre composite has been investigated experimentally. The ratio of the edge distance to the pin diameter (E/D), and the ratio of the specimen width ...
Numerical and experimental stress analysis of a polymeric composite hip joint prosthesis
(John Wiley & Sons Inc, 1996)
A comparative stress analysis of a polymeric composite hip joint replacement was performed. A prototype short carbon-fiber reinforced PEEK (CF/PEEK) prosthesis was manufactured by injection molding. Finite element (FE) ...
A numerical study of laminar heat convection in ducts of irregular cross-sections
(Pergamon-Elsevier Science Ltd, 1997)
Forced convective heat transfer during hydrodynamically fully developed laminar fluid flow inside ducts of irregular cross section is analyzed utilizing numerical methods. The elliptic grid generation technique is used to ...
Analysis of energy flow in thick plate structures
(Pergamon-Elsevier Science Ltd, 1997)
At sufficiently high frequencies: where the structural wavelength is much smaller than the thickness of the structure, the rotational inertia and transverse shear effects become increasingly important. In this study the ...
Analysis of orthotropic plate structures by the direct-dynamic stiffness method
(Pergamon-Elsevier Science Ltd, 1995)
…
Natural frequencies of cross-ply laminated singly curved panels
(Pergamon-Elsevier Science Ltd, 1996)
…
Ultrasonic array imaging based on spatial interpolation
(I E E E, 1996)
…
An assessment of the effects of in-plane vibrations on the energy flow between coupled plates
(Academic Press Ltd, 1996)
The majority of the studies of energy transmission in plate-type structures are based on the assumption that the main component of the energy transfer is due to flexural waves, and the contribution of in-plane waves may ...
Analytical and finite element comparisons of stress intensity factors of composite materials
(Elsevier Sci Ltd, 2000)
In this paper, a comparative study regarding the determination of stress intensity factors (SIF) for non-standard thin composite plates is presented. Carbon-epoxy composite plates are considered for the study. Unnotched ...