• Kuvars ve metakaolen katkısının jeopolimerlerin özellikleri üzerine etkisi 

  Aydın, Tuna (2017)

  Yapılan bu çalışmada jeopolimer malzemelerin mikroyapı özellikleri üzerine kuvars ve metakaolen katkısının etkileri incelenmiştir. Bu doğrultuda, numunelerin üretiminde kullanılan uçucu kül Soma Termik Santrali uçucu külü ...

• AZ91 magnezyum alaşımının sol-jel yöntemiyle hidroksiapatit kaplanması 

  Albayrak, Sevda; Çinici, Hanifi; Çalın, Recep; Cömert, Canser (2017)

  Bu çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik ...

• Investigation of wear resistance of the porcelain tile bodies by solid particle impingement using alumina particles 

  Aydin, Tuna; Bican, Osman; Gumruk, Recep (SPRINGER, 2020)

  Wear resistance is of great importance for many industries related with minerals. The particles seen in these industries may cause erosion. These particles may have various sizes, shapes, and hardness, and may also impact ...

• Effects Of The Boriding Process And Of Quenching And Tempering After Boriding On The Microstructure, Hardness And Wear Of AISI 5140 Steel 

  Bican, Osman; Bayca, Salih Ugur; Ocak-Araz, Sule; Yamaneli, Bunyamin; Tanis, Naci Arda (WORLD SCIENTIFIC PUBL CO PTE LTD, 2020)

  An investigation was made on the effects of the boriding process and of quenching and tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel. In this study, a new boriding agent (Baybora (R)-1) ...

• Microstructure evolution and hardness of MWCNT-reinforced Sn-5Sb/Cu composite solder joints under different thermal aging conditions 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Calin, R.; Ilyas, R. A. (PERGAMON-ELSEVIER SCIENCE LTD, 2020)

  In this work, multi-walled carbon nanotubes (MWCNTs) reinforced Sn-5Sb/Cu composite solder joints were synthesized and the effects of MWCNTs addition on the microstructure evolution and hardness of the Sn-5Sb solder alloy ...

• Mixed Alkali and Mixed Alkaline-Earth Effect in Ceramic Sanitaryware Bodies Incorporated with Blast Furnace Slag 

  Aydin, Tuna; Casin, Eray (SPRINGER, 2020)

  Raw materials and energy are among the most important costs in ceramic sanitaryware production. With the decrease in raw material sources and increasing costs of energy in recent years, researches on alternative raw materials ...

• Tailored pore structures and mechanical properties of porous alumina ceramics prepared with corn cob pore-forming agent 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Ojo-Kupoluyi, O. J.; Calin, R.; Zuhri, M. Y. M. (WILEY, 2021)

  In this work, the effects of porosity and different particle sizes of pore-forming agent on the mechanical properties of porous alumina ceramics have been reported. Different grades of porous alumina ceramics were developed ...

• The effect of cement raw mix waste dust on porcelain tile properties 

  Aydin, Tuna; Paksoy, Cigdem (Springer, 2019)

  Nowadays, the recycling of industrial waste is one of the priority issues. Recycling studies related with reducing the negative effects of wastes on the environment are becoming increasingly important. It was believed that ...

• The development of porcelain foams lighter than water for heat isolation application 

  Aydin, Tuna (Springer, 2019)

  In this study, technological and heat isolation properties of porous ultra-lightweight porcelain foams were investigated. Traditional construction materials such as brick show good durability against environmental conditions. ...

• Addition of cement kiln dust in ceramic wall tile bodies 

  Aydin, Tuna; Tarhan, Muge; Tarhan, Baran (Springer, 2019)

  The volume of wastes generated from heavy industries, such as cement and steel industries, is increasing, and the cost of landfill disposal grows daily. Economical and eco-friendly areas of recycle are being developed to ...

• Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn-5Sb solder composites on Cu substrate 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Ojo-Kupoluyi, O. J.; Calin, R. (Elsevier Science Sa, 2019)

  In this study, the effect of multi-walled carbon nanotubes (MWCNTs) reinforcement on the intermetallic compound (IMC) layer growth and shear strength of Sn-5Sb-xCNT/Cu composite solder joints subjected to different isothermal ...

• Optimization of Leaching Parameters of Aluminum Hydroxide Extraction from Bauxite Waste Using the Taguchi Method 

  Bayca, Salih U.; Kisik, Hakan (Wiley, 2018)

  In this study, the statistical optimization of the leaching parameters of aluminum hydroxide extraction from bauxite waste (red mud) was investigated. The extraction parameters were solid-to-liquid ratio, base concentration, ...

• The Effect of Nepheline Syenite Addition on Pyroplastic Deformation of Sanitarywares 

  Aydin, Tuna; Kunduraci, Nazim; Akbay, Atamer (Int Inst Science Sintering (I I S S), 2018)

  Nepheline syenite is used instead of feldspars as fluxing in ceramics. In this study, three ceramic bodies were prepared. Nepheline syenite was substituted by Na feldspar in the ratio of maximum 30 wt.%. The pyroplastic ...

• Development of porous lightweight clay bricks using a replication method 

  Aydin, Tuna (Australian Ceramic Society, 2018)

  This study focused on porous lightweight clay bricks as a construction material as opposed to autoclaved aerated concrete and pumice blocks. Traditional clay bricks exhibit good stability against environmental conditions ...

• The Effects of Nitrogen Gas on Microstructural and Mechanical Properties of TIG Welded S32205 Duplex Stainless Steel 

  Basyigit, Aziz Baris; Kurt, Adem (Mdpi, 2018)

  Duplex stainless steels are gaining greater interest due to their increasing amounts of application fields. Accordingly, there is a need for awareness of problems associated with improper microstructural distributions such ...

• Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Norkhairunnisa, M.; Sobri, S.; Calin, R.; Ismarrubie, Z. N. (Elsevier Science Sa, 2018)

  Porous alumina systems are suitable for application in wide-ranging industrial processes that require extreme service conditions such as high temperatures and corrosive mediums due to their remarkable thermal and chemical ...

• Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Norkhairunnisa, M.; Sobri, S.; Calin, R.; Ismarrubie, Z. N. (Elsevier Sci Ltd, 2018)

  The mechanical performance and chemical stability of porous alumina materials operating under harsh service conditions are of utmost importance in understanding their operational behavior if they are to stand the test of ...

• Agro-waste shaped porous Al2O3/Ni composites: Corrosion resistance performance and artificial neural network modelling 

  Dele-Afolabi, T. T.; Hanim, M. A. Azmah; Norkhairunnisa, M.; Sobri, S.; Calin, R.; Ismarrubie, Z. N. (Elsevier Science Inc, 2018)

  In the present study, an analysis on the combined effect of nickel (Ni) reinforcement and pore former type in characterizing the corrosion behavior of composite porous alumina ceramics was performed. In order to showcase ...

• The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds 

  Basyigit, Aziz Baris; Murat, Mustafa Gokhan (Mdpi, 2018)

  The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, ...

• Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration 

  Calin, Recep; Pul, Muharrem; Bican, Osman; Kucukturk, Gokhan (Walter De Gruyter Gmbh, 2017)

  In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and ...

View more