Ara
Toplam kayıt 16, listelenen: 11-16
Kuvars ve metakaolen katkısının jeopolimerlerin özellikleri üzerine etkisi
(2017)
Yapılan bu çalışmada jeopolimer malzemelerin mikroyapı özellikleri üzerine kuvars ve metakaolen katkısının etkileri incelenmiştir. Bu doğrultuda, numunelerin üretiminde kullanılan uçucu kül Soma Termik Santrali uçucu külü ...
AZ91 magnezyum alaşımının sol-jel yöntemiyle hidroksiapatit kaplanması
(2017)
Bu çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik ...
Investigation of Leaching Kinetics of Ulexite Waste in Oxalic Acid Solutions
(Croatian Soc Chemical Engineering Technology, 2014)
The dissolution of ulexite waste in oxalic acid solutions was studied in a batch reactor after characterization of the waste by X-ray diffiaction (XRD) analysis and X-ray fluorescence (XRF) analysis. The dissolution ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effect of matrix temperature and powder size on the infiltration height of SiO2 -reinforced Al 7075 matrix composites produced by vacuum infiltration
(Adcotec Ltd, 2011)
In this study, Al-MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement-volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix ...