Ara
Toplam kayıt 34, listelenen: 21-30
Effects Of The Boriding Process And Of Quenching And Tempering After Boriding On The Microstructure, Hardness And Wear Of AISI 5140 Steel
(WORLD SCIENTIFIC PUBL CO PTE LTD, 2020)
An investigation was made on the effects of the boriding process and of quenching and tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel. In this study, a new boriding agent (Baybora (R)-1) ...
Microstructure evolution and hardness of MWCNT-reinforced Sn-5Sb/Cu composite solder joints under different thermal aging conditions
(PERGAMON-ELSEVIER SCIENCE LTD, 2020)
In this work, multi-walled carbon nanotubes (MWCNTs) reinforced Sn-5Sb/Cu composite solder joints were synthesized and the effects of MWCNTs addition on the microstructure evolution and hardness of the Sn-5Sb solder alloy ...
Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber
(Elsevier Sci Ltd, 2015)
Autoclaved aerated concrete (MC) is a construction material obtained by being pore-forming of the mixture prepared with finely crushed siliceous aggregate lime, water and limestone with the addition of aluminum powder and ...
Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
(Korean Assoc Crystal Growth, Inc, 2014)
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts ...
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6XXX and 7XXX Aluminum Alloys
(Springer, 2014)
The effect of aging treatment on the surface roughness and mechanical properties of AA6061 and AA7075 alloys was studied. Microhardness and tensile tests were used to investigae the mechanical properties. X-ray diffraction ...
Effects of Alumina on Porcelain Insulators
(Australian Ceramic Society, 2016)
This study was conducted under both industrial and laboratory conditions for improving material properties (i.e. mechanical and electrical) of electroporcelain bodies produced by porcelain insulator factories in Turkey. ...
Investigation of abrasion in Al-MgO metal matrix composites
(Pergamon-Elsevier Science Ltd, 2014)
In this study, the effects of reinforcement volume fractions on abrasive wear behavior were examined in Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement - volume ratios produced by melt-stirring. ...
The study of MIG weldability of heat-treated aluminum alloys
(Springer London Ltd, 2013)
In this article, Metal Inert Gas (MIG) weldability of commercially received and aged samples of 6061-T-6 and 7075-T-651 aluminum alloys was investigated. The welding joints were prepared in ten different combinations. ...
Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method
(Sage Publications Ltd, 2011)
In this study, the effects of the reinforcement volume fraction on the abrasive wear behaviour of reinforced MgO composites produced by the vacuum infiltration method with 5, 10, and 15 vol% of the volume fraction of Al ...