Ara
Toplam kayıt 10, listelenen: 1-10
Düşük takviyeli MgO-Al kompozitlerin vakumlu infiltrasyonunda takviye oranının infiltrasyon davranışına etkisi
(2009)
Bu çalışmada 149 µm parçacık büyüklüğündeki MgO tozları % 5, 10, 15 takviye-hacim oranı oluşturacak şekilde çelik tüp içersine serbest halde yerleştirilmiştir. Farklı sıcaklıklarda 550 mmHg vakum ve 5 dakika süre ile %5 ...
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
An Investigation of Abrasive Wear Behaviour of Al 2014-SiC Composites
(Walter De Gruyter Gmbh, 2015)
In this study, the effects of SiC reinforcement volume fractions on hardness, porosity and abrasive wear behaviour were examined in Al 2014-SiC (<92.3 mu m) reinforced metal matrix composites (MMCs) of 3%, 6% and 12% ...
AZ91 magnezyum alaşımının sol-jel yöntemiyle hidroksiapatit kaplanması
(2017)
Bu çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik ...
Investigation of abrasion in Al-MgO metal matrix composites
(Pergamon-Elsevier Science Ltd, 2014)
In this study, the effects of reinforcement volume fractions on abrasive wear behavior were examined in Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement - volume ratios produced by melt-stirring. ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effects Of Sintering, Ageing And Cryogenic Treatments On Structural And Mechanical Properties Of Aa2014-B4c Composite
(Gazi Univ, Fac Engineering Architecture, 2013)
In this study, powders of gas atomized AA2014 and solid B4C were mixed and then used in an infiltration system. To attain particulate reinforced aluminum composites, fine particles of B4C were added in right proportions ...
An investigation of surface quality of turning in al matrix mgo reinforced composite material
(Gazi Univ, Fac Engineering Architecture, 2011)
In this study; Al/MgO composites having 5 %, 10 %, 15 % volume fraction of reinforcement are produced by vacuum infiltration method and microstructure of composites are determined. Produced materials of metal matrix composite ...
Effect of Reinforcement Volume Ratio on Thermal Conductivity of SiO2 Reinforced Al Matrix Composite Produced by Vacuum Infiltration Method
(Asian Journal Of Chemistry, 2010)
In this study, SiO2 powders with 105 mu m particle size were filled in quartz tubes freely to form 30, 40, 50% reinforcement volume ratios. Liquid A17075 alloy was vacuum infiltrated into the SiO2 compact under the same ...