Ara
Toplam kayıt 7, listelenen: 1-7
Metal MatrisliKompozitlerinTornalanmasında İlerleme Oranının Kesici Takım Aşınma Davranışlarına Etkisi
(2014)
Kompozit malzemeler, kullanım alanı hızla genişleyen mühendislik malzemeleri olup Metal MatrisliKompozitler (MMK) de bu malzemelerden birisidir. Bu çalışmada; MMK malzemelerin işlenebilirliği üzerinde bazı yorumlar ...
Düşük takviyeli MgO-Al kompozitlerin vakumlu infiltrasyonunda takviye oranının infiltrasyon davranışına etkisi
(2009)
Bu çalışmada 149 µm parçacık büyüklüğündeki MgO tozları % 5, 10, 15 takviye-hacim oranı oluşturacak şekilde çelik tüp içersine serbest halde yerleştirilmiştir. Farklı sıcaklıklarda 550 mmHg vakum ve 5 dakika süre ile %5 ...
Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration
(Walter De Gruyter Gmbh, 2017)
In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and ...
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effect of matrix temperature and powder size on the infiltration height of SiO2 -reinforced Al 7075 matrix composites produced by vacuum infiltration
(Adcotec Ltd, 2011)
In this study, Al-MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement-volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix ...
An investigation of surface quality of turning in al matrix mgo reinforced composite material
(Gazi Univ, Fac Engineering Architecture, 2011)
In this study; Al/MgO composites having 5 %, 10 %, 15 % volume fraction of reinforcement are produced by vacuum infiltration method and microstructure of composites are determined. Produced materials of metal matrix composite ...