Ara
Toplam kayıt 41, listelenen: 1-10
Effect of Cu addition on microstructure and mechanical properties of NiTi based shape memory alloy
(2018)
In this research paper, pre-alloyed NiTi based shape memory alloy and 4%Cu were used asstarting powder materials. Starting powder materials were blended for 60 minutes by a turbulamixer. After mix processing, microstructure ...
Investigating the effect of porosity level and pore former type on the mechanical and corrosion resistance properties of agro-waste shaped porous alumina ceramics
(Elsevier Sci Ltd, 2017)
The strength integrity and chemical stability of porous alumina ceramics operating under extreme service conditions are of major importance in understanding their service behavior if they are to stand the test of time. In ...
Investigation of the Weld Properties of Dissimilar S32205 Duplex Stainless Steel with AISI 304 Steel Joints Produced by Arc Stud Welding
(Mdpi Ag, 2017)
UNS S32205 duplex stainless steel plates with a thickness of 3 mm are arc stud welded by M8 x 40 mm AISI 304 austenitic stainless steel studs with constant stud lifts in order to investigate the effects of welding arc ...
Development of lightweight ceramic construction materials based on fly ash
(Australian Ceramic Society, 2017)
This study aims to demonstrate the suitability of using lightweight ceramics as a construction material in preference to autoclaved aerated concrete and pumice blocks or the more commonly used brick. For construction ...
Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: A short review
(Elsevier Sci Ltd, 2017)
Macroporous ceramics with tailored porosity offer a great deal of advantage in wide-ranging industrial applications including fluid filtration, thermal insulation and lately, waste water treatment. To a large extent, ...
The Effect of Nepheline Syenite Addition on the Sintering Behaviour of Sanitaryware Bodies
(Australian Ceramic Society, 2016)
In this study, the effect of nepheline syenite addition on the sintering and material properties of sanitaryware porcelain bodies was investigated. Three ceramic sanitaryware bodies were prepared by substituting Na feldspar ...
Reusing sanitaryware waste products in glazed porcelain tile production
(Elsevier Sci Ltd, 2017)
Reusing the waste products generated in ceramic manufacturing is an environmentally responsible and sustainable approach. This study aims to protect natural resources, minimise raw material costs and manage waste-generated ...
Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration
(Walter De Gruyter Gmbh, 2017)
In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and ...
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
(Walter De Gruyter Gmbh, 2015)
In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ...
The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds
(Mdpi, 2018)
The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, ...