Ara
Toplam kayıt 10, listelenen: 1-10
Effect of Cu addition on microstructure and mechanical properties of NiTi based shape memory alloy
(2018)
In this research paper, pre-alloyed NiTi based shape memory alloy and 4%Cu were used asstarting powder materials. Starting powder materials were blended for 60 minutes by a turbulamixer. After mix processing, microstructure ...
Investigation of the Weld Properties of Dissimilar S32205 Duplex Stainless Steel with AISI 304 Steel Joints Produced by Arc Stud Welding
(Mdpi Ag, 2017)
UNS S32205 duplex stainless steel plates with a thickness of 3 mm are arc stud welded by M8 x 40 mm AISI 304 austenitic stainless steel studs with constant stud lifts in order to investigate the effects of welding arc ...
The Effects of TIG Welding Rod Compositions on Microstructural and Mechanical Properties of Dissimilar AISI 304L and 420 Stainless Steel Welds
(Mdpi, 2018)
The usage of AISI/SAE 304L austenitic and 420 martensitic stainless steels is receiving greater interest especially in the defence and navy industries. 304L stainless steels exhibit excellent resistance to oxidizing media, ...
The Effect of Nepheline Syenite Addition on Pyroplastic Deformation of Sanitarywares
(Int Inst Science Sintering (I I S S), 2018)
Nepheline syenite is used instead of feldspars as fluxing in ceramics. In this study, three ceramic bodies were prepared. Nepheline syenite was substituted by Na feldspar in the ratio of maximum 30 wt.%. The pyroplastic ...
The Effects of Nitrogen Gas on Microstructural and Mechanical Properties of TIG Welded S32205 Duplex Stainless Steel
(Mdpi, 2018)
Duplex stainless steels are gaining greater interest due to their increasing amounts of application fields. Accordingly, there is a need for awareness of problems associated with improper microstructural distributions such ...
Effect of nickel addition on the microstructure and corrosion resistance properties of porous alumina composites shaped with sugarcane bagasse pore-forming agent
(Iop Publishing Ltd, 2019)
In this study, the effect of nickel (Ni) addition on the microstructure and corrosion resistance properties of porous alumina (Al2O3) composites shaped with sugarcane bagasse pore-forming agent were evaluated. Plain and ...
Investigation of Leaching Kinetics of Ulexite Waste in Oxalic Acid Solutions
(Croatian Soc Chemical Engineering Technology, 2014)
The dissolution of ulexite waste in oxalic acid solutions was studied in a batch reactor after characterization of the waste by X-ray diffiaction (XRD) analysis and X-ray fluorescence (XRF) analysis. The dissolution ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ...
Effect of matrix temperature and powder size on the infiltration height of SiO2 -reinforced Al 7075 matrix composites produced by vacuum infiltration
(Adcotec Ltd, 2011)
In this study, Al-MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement-volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix ...