Ara
Toplam kayıt 45, listelenen: 31-40
Investigation of wear resistance of the porcelain tile bodies by solid particle impingement using alumina particles
(SPRINGER, 2020)
Wear resistance is of great importance for many industries related with minerals. The particles seen in these industries may cause erosion. These particles may have various sizes, shapes, and hardness, and may also impact ...
Microstructure evolution and hardness of MWCNT-reinforced Sn-5Sb/Cu composite solder joints under different thermal aging conditions
(PERGAMON-ELSEVIER SCIENCE LTD, 2020)
In this work, multi-walled carbon nanotubes (MWCNTs) reinforced Sn-5Sb/Cu composite solder joints were synthesized and the effects of MWCNTs addition on the microstructure evolution and hardness of the Sn-5Sb solder alloy ...
AZ91 magnezyum alaşımının sol-jel yöntemiyle hidroksiapatit kaplanması
(2017)
Bu çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik ...
Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber
(Elsevier Sci Ltd, 2015)
Autoclaved aerated concrete (MC) is a construction material obtained by being pore-forming of the mixture prepared with finely crushed siliceous aggregate lime, water and limestone with the addition of aluminum powder and ...
Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
(Korean Assoc Crystal Growth, Inc, 2014)
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts ...
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6XXX and 7XXX Aluminum Alloys
(Springer, 2014)
The effect of aging treatment on the surface roughness and mechanical properties of AA6061 and AA7075 alloys was studied. Microhardness and tensile tests were used to investigae the mechanical properties. X-ray diffraction ...
Investigation of Leaching Kinetics of Ulexite Waste in Oxalic Acid Solutions
(Croatian Soc Chemical Engineering Technology, 2014)
The dissolution of ulexite waste in oxalic acid solutions was studied in a batch reactor after characterization of the waste by X-ray diffiaction (XRD) analysis and X-ray fluorescence (XRF) analysis. The dissolution ...
Investigation of abrasion in Al-MgO metal matrix composites
(Pergamon-Elsevier Science Ltd, 2014)
In this study, the effects of reinforcement volume fractions on abrasive wear behavior were examined in Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement - volume ratios produced by melt-stirring. ...
The study of MIG weldability of heat-treated aluminum alloys
(Springer London Ltd, 2013)
In this article, Metal Inert Gas (MIG) weldability of commercially received and aged samples of 6061-T-6 and 7075-T-651 aluminum alloys was investigated. The welding joints were prepared in ten different combinations. ...
Effect of Infiltration Pressure on Thermal Conductivity of Al 2014 Matrix Composite Powered by Silicon Carbide
(Asian Journal Of Chemistry, 2012)
By using pressure infiltration method, metal matrix composites are produced by saturating Al 2014 aluminum composite to the gaps among SiC powders. SiC powders filled into stainless steel tubes are fastened between the ...