Yazar "Dag, Ilker Emin" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • [ X ]
    Öğe
    Effects of Cr and W in TiMoNb Refractory High Entropy Alloys
    (Springer India, 2024) Simsek, Tuncay; Kurtulus, Altug; Avar, Baris; Guler, Seval Hale; Dag, Ilker Emin; Chattopadhyay, Arun K.
    This study focuses on synthesizing and characterizing mechanically alloyed refractory high entropy alloys (RHEA) containing TiMoNb, Cr, W, and Cr + W. Analytical techniques including XRD, SEM, EDX, DTA, and TGA were employed to explore the influence of Cr and W on the alloys' structure, morphology, and thermal stability towards oxidation. XRD analysis confirmed the formation of a single-phase bcc solid solution in TiMoNbCr, TiMoNbW, and TiMoNbCrW alloys. Crystallite size decreased as milling progressed, yielding average sizes of approximately 7.2 nm, 7.4 nm, and 9.7 nm, with lattice strains of 1.143%, 1.148%, and 1.15%, respectively. Both experimental and calculated values of lattice parameters converged to around 3.1685 +/- 0.002 and 3.1791 +/- 0.010 angstrom for all three alloys. The synergy of Cr and W in TiMoNb was observed for the first time, impacting dislocation density, hardness, and oxidation stability. TiMoNbCrW exhibited reduced dislocation density and the highest hardness (502 HV). TGA indicated enhanced oxidation resistance up to 400 degrees C for TiMoNbCrW compared to the most vulnerable TiMoNbCr alloy.
  • [ X ]
    Öğe
    Nanocrystalline NiTiB reinforced aluminum matrix composites: Synthesis, structural, mechanical and corrosion properties
    (Sage Publications Ltd, 2024) Pul, Muharrem; Dag, Ilker Emin; Simsek, Tuncay; Avar, Baris; Chattopadhyay, Arun K.
    In this study, aluminum composites were developed using a powder metallurgy route by incorporating varying amounts of nanocrystalline NiTiB into the Al2024 alloy. The effects of nanocrystalline NiTiB on the structural, morphological, corrosion, and mechanical properties of the aluminum composites were thoroughly investigated. The results showed that the base alloy and composites with 2% and 4% NiTiB exhibited the highest relative density. The composite with 4% NiTiB achieved the maximum hardness of 87.4 HV. Additionally, the inclusion of nanocrystalline NiTiB significantly improved the compressive strength, corrosion resistance, and wear resistance of the composites. Specifically, the compressive strength increased by approximately 2% with 2% NiTiB and by around 13% with 12% NiTiB. Corrosion resistance was highest in the composite with 4% NiTiB, as confirmed by electrochemical impedance spectroscopy. In the wear-loss study, the wear loss of the composites was found to be reduced by 244% and 457% for those reinforced with 2% and 12% NiTiB, respectively. These findings underscore the potential of nanocrystalline NiTiB to enhance the performance of Al2024 composites in applications demanding superior corrosion resistance, mechanical strength, and wear resistance.