Yazar "Yönetken, Ahmet" seçeneğine göre listele

Listeleniyor 1 - 1 / 1
  • [ X ]
    Öğe
    Production and Characterization Of Ti-10Cr-3,33Co-3,33Egg Shelter Composite Materials Using By Powder Metallurgy
    (Kırıkkale Üniversitesi, 2020) Yönetken, Ahmet; Pesmen, Günnur; Erol, Ayhan
    Titanium-based intermetallic compoundsare frequently used in the production of biomaterials. The behavior of titaniumsimilar to bone mechanical properties causes the use of titanium as abiomaterial and preferred among the materials. It also makes its use attractivein industrial applications at high temperatures. TiCrCo intermetallics areknown to be used together with Ti matrix materials to improve the properties ofthe group in addition to elements such as Cr, especially Ti, Co, Mo and Fe invarious application areas. This information is used frequently in the sinteringprocess. In this study, Ti-10Cr-3,33Co-3,33 egg shelter powders were prepared as a sample mixture. When the properties of the samples produced after sintering are examined, it shows the effects of Co on TiCr. 3.33% Co additive was used in the composition of the composition and mechanical properties were determined in the produced samples. By looking at metallographic analysis, structural features were tried to be determined. The density of the produced samples was calculated, hardness and shear strength were determined. According to the results of the analysis, 3.33% Co composition and 3.71 gr / cm3 density, and 285.5 HV hardness values at 1200 ° C were obtained. In this study,Ti-10Cr-3,33Co-3,33 egg shelter powders were prepared as a sample mixture. Whenthe properties of the samples produced after sintering are examined, it showsthe effects of Co on TiCr. 3.33% Co additive was used in the composition of thecomposition and mechanical properties were determined in the produced samples.By looking at metallographic analysis, structural features were tried to bedetermined. The density of the produced samples was calculated, hardness andshear strength were determined. According to the results of the analysis, 3.33%Co composition and 3.71 gr / cm3 density, and 285.5 HV hardness values at 1200° C were obtained..