Başlık için Meslek Yüksekokulları listeleme
Toplam kayıt 187, listelenen: 40-59
-
Development of poly(3-aminophenylboronic acid) modified graphite rod electrode suitable for fluoride determination
(Elsevier Science Bv, 2014)Poly(3-aminophenylboronic acid), (PAPBA) film was formed on the graphite rod surface by potential cycling. The PAPBA-modified graphite rod (PAPBA/GR) electrode prepared in this way was used for potentiometric fluoride ... -
Dini Mesajların Tüketici Algılamaları ve Tercih Eğilimine Etkisi Üzerine Deneysel Bir Çalışma
(2017)Bu çalışmada pazarlama iletişimlerinde İslami sembollerin tüketici algılama ve davranış eğilimlerindeki etkileri incelenmektedir. Bu kapsamda genç tüketiciler ile deney çalışması gerçekleştirilmiştir. Çalışma belirlenen ... -
Discrete Eigenvalues of Case Spectrum with Anisotropic Scattering
(Taylor & Francis Inc, 2018)Discrete eigenvalues of a one-speed linear transport equation with anisotropic scattering are studied. It is shown that there is only one pair of real discrete eigenvalues for linear, quadratic, or triplet scattering for ... -
A disposable gold-cellulose nanofibril platform for SERS mapping
(ROYAL SOC CHEMISTRY, 2020)In this study, we present a disposable and inexpensive paper-like gold nanoparticle-embedded cellulose nanofibril substrate for the rapid enumeration ofEscherichia coli(E. coli) using surface-enhanced Raman scattering ... -
Does Achievement of Hemostasis After Pulp Exposure Provide an Accurate Assessment of Pulp Inflammation?
(Amer Acad Pediatric Dentistry, 2018)Purpose: The purpose of this study was to determine in primary molars with carious exposures whether hemostasis at the exposure site and pulp orifice reflected inflammatory status of the pulp at the canal orifice based on ... -
Due Date Single Machine Scheduling Problems with Nonlinear Deterioration and Learning Effects and Past Sequence Dependent Setup Times
(Hindawi Ltd, 2014)We present some problems against due dates with nonlinear learning and deterioration effects and past sequence dependent setup times. In this study, two effects (learning and deterioration) are used for the same processing ... -
Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites
(Int Inst Science Sintering (I I S S), 2018)In this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under ... -
The Effect of Boredom Proneness on Smartphone Addiction and Impulse Purchasing: A Field Study with Young Consumers in Turkey
(KOREA DISTRIBUTION SCIENCE ASSOC, 2020)The study seeks to understand the effects of boredom proneness on impulse purchasing and smartphone addiction of young consumers. Moreover, the possible mediating role of smartphone addiction is tested for the effect of ... -
The Effect Of Different Environmental Conditions On Yield And Oil Rates Of Safflower (Carthamus Tinctorius L.)
(Parlar Scientific Publications (P S P), 2018)Safflower (Carthamus tinctorius L.) is an important vegetable oil plant for human consumption and alternative bioenergy source. Also, this plant is used for the evaluation of fallow and marginal land areas in the world. ... -
The Effect of Fiberboard Modification on Adhesion Strength to Polyvinyl Chloride (PVC) Sheets or Eastern Beech (Fagus orientalis L.) Veneers
(North Carolina State Univ Dept Wood & Paper Sci, 2018)The adhesion strength was evaluated for polyvinyl chloride (PVC) and Eastern beech (Fagus orientalis L.) veneers glued onto specially produced fiberboards using urea-formaldehyde (UF), polyvinyl acetate (PVAc), and ... -
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
(Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ... -
Effect of sintering on mechanical property of SiC/B4C reinforced aluminum
(Iop Publishing Ltd, 2019)In this study, SiC (silicon carbide) and B4C (boron carbide) added Al 7075 based composites were prepared at 40%, 20% and 10% reinforcement ratios. Using powder metallurgy, composite sample with 9 different structures were ... -
Effect of sintering temperature on pore ratio and mechanical properties of composite structure in nano graphene reinforced ZA27 based composites
(SPRINGER, 2020)Nano graphene platelet (Gr) reinforced nano composites with a zinc-aluminum alloy (ZA27) matrix were produced by powder metallurgy at four different mass ratios (0.5wt%, 1.0wt%, 2.0wt% and 4.0wt%) and three different ... -
Effect of Thermocycling on the Structure of Martensite and Kinetics of Martensitic Transformation in Alloy Fe-30% Ni-3% Pd
(Springer, 2017)The methods of scanning electron microscopy, differential scanning calorimetry and x-ray diffraction are used to study the morphological and thermal characteristics of cooling-induced martensite in alloy Fe - 30% Ni - 3% ... -
Effectiveness of the biophysical barriers on the peridural fibrosis of a postlaminectomy rat model: An experimental research
(Elsevier Sci Ltd, 2011)Purpose: Long term results after surgical treatment of disc herniation have shown that epidural and/or peridural fibrosis formed during the healing process after surgical intervention. We conducted this experimental study ... -
Effects of DMSO on a rabbit ear hypertrophic scar model: A controlled randomized experimental study
(Elsevier Sci Ltd, 2017)Dimethyl sulfoxide (DMSO) is an anti-inflammatory, antibacterial, analgesic drug widely used to treat several diseases as reported in the literature. It has a detractive effect on collagen deposition in the abnormal tissue. ... -
The Effects of Humidity on Cast PA6G during Turning and Milling Machining
(Hindawi Ltd, 2017)We compared the foundry PA6G samples in several dry and humid but different storage environments by processing them under the same cutting conditions such as progress rate (100, 120, 140, and 160 mm/min), cutting rate (90, ... -
Effects Of Some Botanical Insecticides On The Egg Parasitoid Trichogramma Pintoi Voegele (Hymenoptera: Trichogrammatidae)
(Parlar Scientific Publications (P S P), 2016)Egg parasitoids are among the most significant biological control agents of a number of insect pests. Among them, Trichogramma species are the most widely used insect natural enemy in the world. Generally, when it raised ... -
Efficient Removal of Acidic Dye Using Low-Cost Biocomposite Beads
(Amer Chemical Soc, 2013)The objective of this study is to prepare and characterize chitosan/zeolite biocomposite beads and utilize them as adsorbent for removal of anionic dye, Acid Black 194 (AB194). Characterization studies of biocomposite beads ... -
Efficient removal of cationic dyes from aqueous solutions using a modified poly(ethylene terephthalate) fibers adsorbent
(TAYLOR & FRANCIS INC, 2020)A novel adsorbent was synthesized through functionalization of glycidyl methacrylate-g-poly(ethylene terephthalate) (GMA-g-PET) fibers with iminodiacetic acid (IDA) to give IDA-GMA-g-PET fibers. This adsorbent was then ...
