Yazar "Pul, Muharrem" için Makale Koleksiyonu listeleme
-
Düşük takviyeli MgO-Al kompozitlerin vakumlu infiltrasyonunda takviye oranının infiltrasyon davranışına etkisi
Pul, Muharrem; Çalın, Recep; Çıtak, Ramazan; Şeker, Ulvi (2009)Bu çalışmada 149 µm parçacık büyüklüğündeki MgO tozları % 5, 10, 15 takviye-hacim oranı oluşturacak şekilde çelik tüp içersine serbest halde yerleştirilmiştir. Farklı sıcaklıklarda 550 mmHg vakum ve 5 dakika süre ile %5 ... -
Effect of matrix temperature and powder size on the infiltration height of SiO2 -reinforced Al 7075 matrix composites produced by vacuum infiltration
Calin, Recep; Pul, Muharrem; Citak, Ramazan; Seker, Ulvi (Adcotec Ltd, 2011)In this study, Al-MgO metal matrix composites (MMC) were produced with 5 %, 10 % and 15 % reinforcement-volume (R-V) ratios by the melt stirring method. In the production of composites 99.5 % pure Al was used as the matrix ... -
Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration
Calin, Recep; Pul, Muharrem; Bican, Osman; Kucukturk, Gokhan (Walter De Gruyter Gmbh, 2017)In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and ... -
The Effect of Reinforcement Volume Ratio on Porosity and Thermal Conductivity in Al-Mgo Composites
Çalın, Recep; Pul, Muharrem; Pehlivanli, Zuhtu Onur (Univ Fed Sao Carlos, Dept Engenharia Materials, 2012)In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt ... -
An investigation of surface quality of turning in al matrix mgo reinforced composite material
Pul, Muharrem; Çalın, Recep; Citak, Ramazan; Seker, Ulvi (Gazi Univ, Fac Engineering Architecture, 2011)In this study; Al/MgO composites having 5 %, 10 %, 15 % volume fraction of reinforcement are produced by vacuum infiltration method and microstructure of composites are determined. Produced materials of metal matrix composite ... -
An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration
Araz, Sule Ocak; Çalın, Recep; Pul, Muharrem; Bican, Osman; Okur, Onur (Walter De Gruyter Gmbh, 2015)In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the ... -
Metal MatrisliKompozitlerinTornalanmasında İlerleme Oranının Kesici Takım Aşınma Davranışlarına Etkisi
Pul, Muharrem; Şeker, Ulvi (2014)Kompozit malzemeler, kullanım alanı hızla genişleyen mühendislik malzemeleri olup Metal MatrisliKompozitler (MMK) de bu malzemelerden birisidir. Bu çalışmada; MMK malzemelerin işlenebilirliği üzerinde bazı yorumlar ...