Yazar "Suludere, Zekiye" seçeneğine göre listele
Listeleniyor 1 - 5 / 5
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Amperometric glucose sensor based on the glucose oxidase enzyme immobilized on graphite rod electrode modified with Fe3O4-CS-Au magnetic nanoparticles(Springer Heidelberg, 2018) Onay, Aykut; Dogan, Uzeyir; Ciftci, Hakan; Cetin, Demet; Suludere, Zekiye; Tamer, UgurIn this report, an amperometric detection method for blood glucose level was developed benefiting from glucose oxidase (GO) enzyme immobilization on nanoparticle modified graphite rod (GR) electrode. Fe3O4-CS-Au magnetic nanoparticles were synthesized, characterized by TEM, UV-Vis, magnetometry, FTIR, and zeta potential measurements and used for the modification of GR electrode. This modified electrode was used for the detection of glucose level amperometrically at 0.6 V. The obtained calibration graph was linear in the range of 5-30mM glucose concentration with a coefficient of determination (R-2) 0.9971. The limit of detection (LOD) and limit of quantification (LOQ) values were calculated as 0.55 and 1.83mM, respectively. The modified GR electrode showed excellent selectivity in the presence of dopamine, ascorbic acid, and uric acid. The applicability of the developed method was examined in real blood samples by comparing the results obtained from commercial glucose sensor. This novel glucose detection method exhibited fast amperometric response, long storage time, and good selectivity.Öğe High-yield aqueous synthesis of multi-branched iron oxide core-gold shell nanoparticles: SERS substrate for immobilization and magnetic separation of bacteria(Springer, 2014) Tamer, Ugur; Onay, Aykut; Ciftci, Hakan; Bozkurt, Akif Goktug; Cetin, Demet; Suludere, Zekiye; Greneche, Jean-MarcThe high product yield of multi-branched core-shell Fe3-x O-4@Au magnetic nanoparticles was synthesized used as magnetic separation platform and surface-enhanced Raman scattering (SERS) substrates. The multi-branched magnetic nanoparticles were prepared by a seed-mediated growth approach using magnetic gold nanospheres as the seeds and subsequent reduction of metal salt with ascorbic acid in the presence of a stabilizing agent chitosan biopolymer and silver ions. The anisotropic growth of nanoparticles was observed in the presence of chitosan polymer matrix resulting in multi-branched nanoparticles with a diameter over 100 nm, and silver ions also play a crucial role on the growth of multi-branched nanoparticles. We propose the mechanism of the formation of multi-branched nanoparticles while the properties of nanoparticles embedded in chitosan matrix are discussed. The surface morphology of nanoparticles was characterized with transmission electron microscopy, scanning electron microscopy, ultraviolet visible spectroscopy (UV-Vis), X-ray diffraction, and fourier transform infrared spectroscopy and Fe-57 Mossbauer spectrometry. Additionally, the magnetic properties of the nanoparticles were also examined. We also demonstrated that the synthesized Fe3-x O-4@Au multi-branched nanoparticle is capable of targeted separation of pathogens from matrix and sensing as SERS substrates.Öğe Metal removal of cyanobacterial exopolysaccharides by uronic acid content and monosaccharide composition(Elsevier Sci Ltd, 2014) Ozturk, Sahlan; Aslim, Belma; Suludere, Zekiye; Tan, SemaIn the present study, chromium, cadmium and metal mixed (chromium + cadmium) removal and its association with exopolysaccharides and uronic acids production in Synechocystis sp. BAS0671 were investigated. It was investigated that BAS0671 showed different removal ability when exposed to each metal solely and mixed metal. EPS production by BAS0671 was increased following exposure to 15 and 35 ppm Cr(VI), Cd(II) and Cr(VI) + Cd(II). Monomer composition of EPS was changed after metal treatment. Uronic acid contents of metal treated cells were higher than control cells of each isolate. Also, glucuronic acid content and galactronic acid content of EPS correlated with uronic acid contents of cells. Scanning electron microscopy and energy dispersive X-ray spectroscopy analysis confirmed that a considerable amount of metals had precipitated on the cell surface. Fourier transform infrared spectrum analysis of EPSs indicated the presence of C-H and C-O group, which may serve as binding sites for divalent cations. (C) 2013 Elsevier Ltd. All rights reserved.Öğe Nanoparticle embedded chitosan film for agglomeration free TEM images(Wiley-Blackwell, 2017) Dogan, Uzeyir; Ciftci, Hakan; Cetin, Demet; Suludere, Zekiye; Tamer, UgurTransmission electron microscopy (TEM) is a very useful and commonly used microscopy technique, used especially for the characterization of nanoparticles. However, the identification of the magnetic nanoparticle could be thought problematic in TEM analysis, due to the fact that the magnetic nanoparticles are usually form aggregates on the TEM grid to form bigger particles generating higher stability. This prevents to see exact shape and size of each nanoparticle. In order to overcome this problem, a simple process for the formation of well-dispersed nanoparticles was conducted, by covering chitosan film on the unmodified copper grid, it was said to result in aggregation-free TEM images. It is also important to fix the magnetic nanoparticles on the TEM grids, due to possible contamination of TEM filament which is operated under high vacuum conditions. The chitosan film matrix also helps to protect the TEM filament from contact with magnetic nanoparticles during the imaging process. The proposed procedure offers a quick method to fix the nanoparticles in a conventional copper TEM grid and chitosan matrix prevents agglomeration of nanoparticles, and thus getting TEM images showing well-dispersed individual nanoparticles.Öğe Paper membrane-based SERS platform for the determination of glucose in blood samples(Springer Heidelberg, 2015) Torul, Hilal; Çiftçi, Hakan; Çetin, Demet; Suludere, Zekiye; Boyacı, İsmail Hakkı; Tamer, UğurIn this report, we present a paper membrane-based surface-enhanced Raman scattering (SERS) platform for the determination of blood glucose level using a nitrocellulose membrane as substrate paper, and the microfluidic channel was simply constructed by wax-printing method. The rod-shaped gold nanorod particles were modified with 4-mercaptophenylboronic acid (4-MBA) and 1-decanethiol (1-DT) molecules and used as embedded SERS probe for paper-based microfluidics. The SERS measurement area was simply constructed by dropping gold nanoparticles on nitrocellulose membrane, and the blood sample was dropped on the membrane hydrophilic channel. While the blood cells and proteins were held on nitrocellulose membrane, glucose molecules were moved through the channel toward the SERS measurement area. Scanning electron microscopy (SEM) was used to confirm the effective separation of blood matrix, and total analysis is completed in 5 min. In SERS measurements, the intensity of the band at 1070 cm(-1) which is attributed to B-OH vibration decreased depending on the rise in glucose concentration in the blood sample. The glucose concentration was found to be 5.43 +/- 0.51 mM in the reference blood sample by using a calibration equation, and the certified value for glucose was 6.17 +/- 0.11 mM. The recovery of the glucose in the reference blood sample was about 88 %. According to these results, the developed paper-based microfluidic SERS platform has been found to be suitable for use for the detection of glucose in blood samples without any pretreatment procedure. We believe that paper-based microfluidic systems may provide a wide field of usage for paper-based applications.
