Measuring The Surface Roughness Values Of European Hop-Horn Beam (Ostrya Carpinifolla Scop.) Wood
Yükleniyor...
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Slovak Forest Products Research Inst
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the samples obtained from European hop-horn beam (Ostrya carpinifolia Scop.) wood has been subject to cutting with circular saw, planing with a thickness machine and sanding with a caliber sanding machine (with no: 80 sand). After the specimens were processed in the machines in radial and tangential surfaces, their surface roughness values (R-a, R-y, R-z) have been determined in accordance with the ISO 4288 standard. According to the statistical results, the lowest roughness values have been achieved with the thickness machine. Similarly, the roughness values of tangentially cut surfaces have been found to be lower than the radially cut surfaces.
Açıklama
Kilic, Murat/0000-0001-6113-8634
Anahtar Kelimeler
Surface roughness, Ostrya calpinffolia Scop, wood machining, cutting directions
Kaynak
Wood Research
WoS Q DeÄŸeri
Q3
Scopus Q DeÄŸeri
Cilt
63
Sayı
2
Künye
closedAccess
