Thermophysical properties of castor oil (Ricinus communis L.) biodiesel and its blends

dc.contributor.authorGokdogan O.
dc.contributor.authorEryilmaz T.
dc.contributor.authorYesilyurt M.K.
dc.date.accessioned2020-06-25T15:17:40Z
dc.date.available2020-06-25T15:17:40Z
dc.date.issued2015
dc.departmentKırıkkale Üniversitesi
dc.description.abstractBiodiesel (methyl ester) was produced from Castor Oil (Ricinus communis) using NaOH and CH3OH by the two-step transesterification method. Nine different fuel blends (2, 5, 10, 20, 30, 40, 50, 60 and 75 vol.% blending with diesel) were prepared. The density values of Castor Oil Biodiesel (COB) and its blends were measured at 0°C to 93°C temperature range, as well as their kinematic viscosity values at 30°C to 100°C temperature range in the steps of 5°C. The density, kinematic viscosity, calorific value, flash point, pH, copper strip corrosion, and H2O content of COB were 932.40 kg/cu m, 15.069 mm2/s, 38.600 MJ/kg, 182°C, 7, 1a and 1067.7 mg/kg-1, respectively. The density and kinematic viscosity of fuel samples decreased as temperature increases. These thermophysical properties decreased due to the increase in the amount of diesel in the blends.en_US
dc.identifier.endpage128en_US
dc.identifier.issn01225383
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84960440893
dc.identifier.scopusqualityQ3
dc.identifier.startpage95en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12587/2478
dc.identifier.volume6en_US
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherEcopetrol S.A.en_US
dc.relation.ispartofCTyF - Ciencia, Tecnologia y Futuro
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBiodieselen_US
dc.subjectCastor oilen_US
dc.subjectDensityen_US
dc.subjectFuel propertyen_US
dc.subjectKinematic viscosityen_US
dc.subjectTransesterificationen_US
dc.titleThermophysical properties of castor oil (Ricinus communis L.) biodiesel and its blendsen_US
dc.typeArticle

Dosyalar