Fret Özelliklerinin Fretli Kolon Davranışına Etkileri
[ X ]
Tarih
2011
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Kırıkkale Üniversitesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmada, fret özelliklerinin bileşik eğilme ve eksenel yük altındaki fretli kolonların davranışına etkileri incelenmiştir. Çalışmanın amacı Türk [1] ve Amerikan Beton Enstitüsü’nün Yönetmeliklerinde [2] önerilen iki adet denklemden birine göre hazırlanan deney elemanlarını test etmek ve sonuçları ayrıntılı açıklamak olduğundan altı adet fretli kolon elemanı bileşik eğilme ve eksenel yük altında test edilmiştir [3, 4, 5]. Deney elemanlarının değişken parametreleri toplam beton alanının çekirdek beton alanına oranı ve fretin akma dayanımıdır. Yönetmelikte verilen ve eksenel yüklenmiş kolon davranışını esas alan denklemlere göre hazırlanan kolon numunelerinin deneysel moment-eğrilikleri ve sonuçları irdelenmiş, ayrıca analitik olarak elde edilmiş eğrilikler ile de karşılaştırılmıştır.
In this study, effects of spiral steel characteristics on the behaviour of spiral columns under combined bending and axial load were investigated. Since the object of this study was to test spiral columns designed according to the two equations given in the Turkish [1] and American Concrete Institute’s Codes [2] and to report the results comprehensively, six spiral column specimens were tested under combined bending and axial load [3, 4]. The variable parameters used in this study were the the ratio of the gross concrete area to the confined core area and the yield strength of the spiral steel. Experimental Moment-Curvature graphs and test results of the columns designed according to the current Code equations, based on the axially loaded column behavior, were investigated, and additionally compared with the graphs obtained from the analytical studies.
In this study, effects of spiral steel characteristics on the behaviour of spiral columns under combined bending and axial load were investigated. Since the object of this study was to test spiral columns designed according to the two equations given in the Turkish [1] and American Concrete Institute’s Codes [2] and to report the results comprehensively, six spiral column specimens were tested under combined bending and axial load [3, 4]. The variable parameters used in this study were the the ratio of the gross concrete area to the confined core area and the yield strength of the spiral steel. Experimental Moment-Curvature graphs and test results of the columns designed according to the current Code equations, based on the axially loaded column behavior, were investigated, and additionally compared with the graphs obtained from the analytical studies.
Açıklama
Anahtar Kelimeler
Fretli Kolon, Bileşik Eğilme ve Eksenel Yük, Moment-Eğrilik, Fret Akma Dayanımı, piral Column, Combined Bending and Axial Load, Moment-Curvature, Yield of Spiral Steel
Kaynak
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
3
Sayı
2-47