Investigation of the Using of Shape Memory Alloys to Reduce Vibration in the Cutting Tool in Turning Operations
[ X ]
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Electrical and Electronics Engineers Inc.
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Turning is one of the most widely used machining processes in the industry. The main requirement in the turning process is to achieve acceptable roughness for the surface of the workpiece. Since one of the main factors that affect the surface roughness of the workpiece is the vibration of the cutting tool, these vibrations that occurred during the internal and external turning operations have been analyzed analytically and numerically. Laplace transform method was applied to achieve the analytical study. Both 3140 steel and TiNi3 alloy (as a shape memory alloy) were used in this study as a material of the cutting tool. As a result, it has been found that the use of TiNi3 alloy has a significant effect of reducing vibrations in both internal and external turning operations, and therefore to improve the quality of machining surface, where the vibration amplitude was reduced by 62% and 60.2% in external and internal turning operations respectively. © 2020 IEEE.
Açıklama
4th International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2020
Anahtar Kelimeler
cutting tool, forced vibrations, TiNi3 alloy, Turning
Kaynak
4th International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2020 - Proceedings
WoS Q Değeri
Scopus Q Değeri
N/A
