The Effect of Cutting Tool Wear Behaviors on Feed Rates in Turning of Metal Matrix Composites

Basit Öğe Kaydı
dc.contributor.authorPul, Muharrem
dc.contributor.authorSeker, Ulvi
dc.date.accessioned2025-01-21T16:45:05Z
dc.date.available2025-01-21T16:45:05Z
dc.date.issued2014
dc.departmentKırıkkale Üniversitesi
dc.description.abstractComposite materials, one of them is metal matrix composites (MMCs), is a group of engineering materials who seapplication fields expandrapidly. In this study, to make an interpretation on machinability of MMCs materials, MMC smaterials reinforced Al matrix and MgO which were produced in 5%, 10% and 15% reinforcement-volumeratios (R-V) were subjected to machining tests by carbide (C) and coated carbide (CC) cutting tools. Machining tests were conducted with 300 m/dak cutting speed, at three different feed rates (0.075, 0.15 and 0.225 mm/dev) and fixed depth of cut (1 mm). After the machining tests, wear characteristics were examined by the help of scanning electron microscope (SEM) views of cutting tools and the findings were discussed. In the evaluation of SEM views of cutting tools, the built up edge(BUE) was observed at the head of all cutting tools. As not being within the tool life bound, it is deduced that with the increase in feed rate, a trace of flank wear mechanism on C cutting tools were detected. Generally it is deduced that while CC tools reveal better performance, with regard to tool costs, C tools could be used to operate this kind of MMC smaterials.
dc.identifier.doi10.2339/2014.17.399-106
dc.identifier.endpage106
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue3
dc.identifier.startpage99
dc.identifier.urihttps://doi.org/10.2339/2014.17.399-106
dc.identifier.urihttps://hdl.handle.net/20.500.12587/25585
dc.identifier.volume17
dc.identifier.wosWOS:000447830100001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.language.isotr
dc.publisherGazi Univ
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisi
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241229
dc.subjectMetal Matrix Composites (MMCs); Machinability; MgO; Tool wear; Built up edge (BUE)
dc.titleThe Effect of Cutting Tool Wear Behaviors on Feed Rates in Turning of Metal Matrix Composites
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu