Numerical Investigation of Cooling an Industrial Roller by Using Swirling Jets

dc.contributor.authorKilic, Mustafa
dc.contributor.authorSahin, Mahir
dc.contributor.authorIqbal, Mehmood
dc.contributor.authorDemircan, Tolga
dc.contributor.authorKilinc, Zülfikar
dc.contributor.authorUllah, Atta
dc.date.accessioned2025-01-21T16:28:06Z
dc.date.available2025-01-21T16:28:06Z
dc.date.issued2023
dc.departmentKırıkkale Üniversitesi
dc.description.abstractEffective cooling of industrial rollers has prime importance to prevent the quality degradation of the system and product. High temperature difference on the roller surface may result in thermal stresses and can cause deformations on roller surface and product. In order to prevent these deformations, cooling of an industrial roller by using swirling jets is investigated for different parameters numerically in this study. Effects of Reynolds number, surface heat flux and variation in inlet temperature of the fluid on the performance of an industrial roller are investigated in terms of temperature difference between inner and outer surface of the roller. ANSYS Fluent CFD program is used to simulate heat transfer and fluid flow in this numerical study. As a result, it is obtained that increasing Re number from 1000 to 1700 causes a decrease of 45.4% in the temperature difference between inner and outer surface of the roller. Increasing surface heat flux from 5000 to 12500 W/m2 has resulted in an increase of 149.4% in difference between inner and outer surface temperature. Increasing coolant fluid inlet temperature from 5 to 20°C has resulted in an increase of surface temperature but there is no significant change in heat transfer characteristics of the system. It is evaluated that the results of this study will contribute to design more effective cooled industrial roller. © 2023, TUBITAK. All rights reserved.
dc.identifier.doi10.31202/ecjse.1175261
dc.identifier.endpage159
dc.identifier.issn2148-3736
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85147817103
dc.identifier.scopusqualityQ4
dc.identifier.startpage147
dc.identifier.urihttps://doi.org/10.31202/ecjse.1175261
dc.identifier.urihttps://hdl.handle.net/20.500.12587/23482
dc.identifier.volume10
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTUBITAK
dc.relation.ispartofEl-Cezeri Journal of Science and Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectComputational Fluid Dynamics; Cooling; Industrial roller; Swirling jets
dc.titleNumerical Investigation of Cooling an Industrial Roller by Using Swirling Jets
dc.typeArticle

Dosyalar