Investigation of The Effect of Mechanical Vibration Applied During Solidification on The Microstructure and Properties of Aluminum 356 Alloy

Basit Öğe Kaydı
dc.authoridOzgu, Taha Sureyya/0000-0002-8843-8140
dc.contributor.authorOzgu, Taha Sureyya
dc.contributor.authorCalin, Recep
dc.contributor.authorTanis, Naci Arda
dc.date.accessioned2025-01-21T16:42:11Z
dc.date.available2025-01-21T16:42:11Z
dc.date.issued2024
dc.departmentKırıkkale Üniversitesi
dc.description.abstractManufacturing by casting method in aluminum and its alloys is preferred by different industries today. It may be necessary to improve the mechanical properties of the materials according to different industries and different strength requirements. The mechanical properties of metal alloys are directly related to the microstructure grain sizes. Therefore, many grain reduction methods are used during production or heat treatment. In this study, A356 alloys were molded into molds at 750 degrees C and exposed to vibration frequency at 0, 8.33, 16.66, 25, and 33.33 Hz during solidification. Optical microscopes images were analyzed in image analysis programs to measure the grain sizes of the samples that solidified after solidification. In addition, microhardness tests of samples were carried out to examine the effect of vibration and grain reduction on mechanical behavior. In the analyzes made, it was determined that the grain sizes decreased from 54.984 to 26.958 mu m and the hardness values increased from 60.48 to 126.94 HV with increasing vibration frequency.
dc.description.sponsorshipKirikkale University Scientific Research Fund [BAP 2020/100]
dc.description.sponsorshipThe authors wish to acknowledge the financial supports of Kirikkale University Scientific Research Fund (Grant No.: BAP 2020/100) .
dc.identifier.doi10.24425/afe.2024.149248
dc.identifier.endpage31
dc.identifier.issn1897-3310
dc.identifier.issn2299-2944
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85185727644
dc.identifier.scopusqualityQ3
dc.identifier.startpage26
dc.identifier.urihttps://doi.org/10.24425/afe.2024.149248
dc.identifier.urihttps://hdl.handle.net/20.500.12587/25002
dc.identifier.volume24
dc.identifier.wosWOS:001162623800001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherPolska Akad Nauk, Polish Acad Sciences
dc.relation.ispartofArchives of Foundry Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectCasting; A356; Aluminum; Vibration
dc.titleInvestigation of The Effect of Mechanical Vibration Applied During Solidification on The Microstructure and Properties of Aluminum 356 Alloy
dc.typeArticle

Dosyalar

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu