Sliding Friction and Wear Behavior of Pack-Boronized AISI 1050, 4140, and 8620 Steels

Basit Öğe Kaydı
dc.contributor.authorSoydan, Yavuz
dc.contributor.authorKoksal, Sakip
dc.contributor.authorDemirer, Ahmet
dc.contributor.authorCelik, Veli
dc.date.accessioned2020-06-25T17:48:06Z
dc.date.available2020-06-25T17:48:06Z
dc.date.issued2008
dc.description.abstractThis paper describes the dry sliding friction and wear performance of boronized AISI 1050, 4140, and 8620 steels with the Fe(2)B phase coating on the surface. The studies were carried out using a pin-on-disc arrangement. The disc material was made of carburized AISI 1020 steel. For the normalized (untreated) steels, two basic wear regimes were observed; namely, oxidative and severe metallic wear. In the oxidative regime, a low wear rate of 1E-5 mm(3)/Nm was found. The worn surfaces of the pins and discs were smooth and covered with patchy oxides. In severe wear, the wear rate was very high (1 E-3 mm(3)/Nm). The worn specimens were characterized by rough surfaces, plastic deformation, and metallic wear debris. Boronizing changed the wear mechanisms of steels. The test results showed that the boronized steels underwent oxidative fatigue wear with very low wear rate of 2 E-6 mm(3)/Nm. In addition, boronized steels exhibited lower friction coefficient than normalized steels at a sliding speed of 2 m/s.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1080/10402000701739370
dc.identifier.endpage81en_US
dc.identifier.issn1040-2004
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84879161017
dc.identifier.scopusqualityQ2
dc.identifier.startpage74en_US
dc.identifier.urihttps://doi.org10.1080/10402000701739370
dc.identifier.urihttps://hdl.handle.net/20.500.12587/4301
dc.identifier.volume51en_US
dc.identifier.wosWOS:000261730500005
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofTribology Transactions
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBoronized Steelsen_US
dc.subjectFrictionen_US
dc.subjectWearen_US
dc.subjectDry Slidingen_US
dc.titleSliding Friction and Wear Behavior of Pack-Boronized AISI 1050, 4140, and 8620 Steelsen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Sliding Friction and Wear Behavior of Pack-Boronized AISI 1050, 4140, and 8620 Steels.pdf
Boyut:
4.14 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu