Determination of the Surface Roughness Values of Turkish Red Pine (Pinus brutia (Ten.)) Woods
Yükleniyor...
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
North Carolina State Univ Dept Wood & Paper Sci
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The aim of this study was to determine the surface roughness values of Turkish red pine samples obtained from the seven natural growth areas in Turkey. The samples were cut with a circular saw, planed with a thickness machine, and sanded with a sanding machine ( with No. 80 sandpaper). After the samples were processed as radial and tangential surfaces in the machines, their surface roughness values ( R-a, R-y, and R-z) were measured in accordance with ISO 4288 ( 1996). According to the statistical results, the lowest surface roughness values were in the samples obtained from the Mugla and Samsun areas on the tangential surfaces that were processed with the thickness machine.
Açıklama
Kilic, Murat/0000-0001-6113-8634
Anahtar Kelimeler
Surface roughness, Turkish red pine, Pinus brutia Ten woods, Wood machining, Cutting directions
Kaynak
Bioresources
WoS Q Değeri
Q2
Scopus Q Değeri
Q3
Cilt
12
Sayı
1
Künye
Kılıç, M. (2017). "Determination of the surface roughness values of Turkish red pine (Pinus brutia (Ten.)) woods," BioRes. 12(1), 1216-1227.
