Investigation of the effect of rake angle on main cutting force

Basit Öğe Kaydı
dc.contributor.authorGünay, M.
dc.contributor.authorAslan, E.
dc.contributor.authorKorkut, I.
dc.contributor.authorSeker, U.
dc.date.accessioned2020-06-25T17:40:06Z
dc.date.available2020-06-25T17:40:06Z
dc.date.issued2004
dc.departmentKırıkkale Üniversitesi
dc.descriptionKorkut, Ihsan/0000-0002-5001-4449
dc.description.abstractThis paper presents a study of comparison of empirical and experimental results for main cutting force during machining rotational parts by unworn cutting tools. A dynamometer was designed and produced for measuring the forces. Two strain gauges were placed at the correct position on the machine tool and cutting tool at the design stage. Correct gauge positioning sensed displacements of the tool caused by cutting forces. AISI 1040 was used as the workpiece material. Main cutting force (F-c) was measured for eight different rake angles changing from negative to positive values at five different cutting speeds. The depth of cut and feed rate were kept throughout the experiments. Empirical results according to Kienzle approach were compared with experimental results. Main cutting force was observed to have a decreasing trend as the rake angle increased from negative to positive values. The deviation between empirical approach and experiments was in the order of 10-15%. (C) 2004 Elsevier Ltd. All rights reserved.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1016/j.ijmachtools.2004.01.015
dc.identifier.endpage959en_US
dc.identifier.issn0890-6955
dc.identifier.issn1879-2170
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-2642571768
dc.identifier.scopusqualityQ1
dc.identifier.startpage953en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijmachtools.2004.01.015
dc.identifier.urihttps://hdl.handle.net/20.500.12587/3271
dc.identifier.volume44en_US
dc.identifier.wosWOS:000221922800008
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofInternational Journal Of Machine Tools & Manufacture
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcutting forcesen_US
dc.subjectcutting toolen_US
dc.subjectrake angleen_US
dc.subjectdynamometeren_US
dc.titleInvestigation of the effect of rake angle on main cutting forceen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Investigation of the effect of rake angle on main cutting force.pdf
Boyut:
295.63 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu