Investigation of machinability by electrical discharge machining method of ZA27/MWCNT composites produced by powder metallurgy

Basit Öğe Kaydı
dc.contributor.authorÖzerkan, Hacı Bekir
dc.contributor.authorSubaşi, Mehmet
dc.contributor.authorPul, Muharrem
dc.date.accessioned2025-01-21T16:27:50Z
dc.date.available2025-01-21T16:27:50Z
dc.date.issued2024
dc.departmentKırıkkale Üniversitesi
dc.description.abstractIn recent years, nano-doped metal matrix composites have started to take place among the developed composites. In this study, powder metal undoped ZA27 alloy and 0.5% wt% multi-walled carbon nanotube (MWCNT) doped nano-composite machinability in EDM (electrical discharge machining) were researched. Microstructures of ZA27 nano-doped composites were examined under a scanning electron microscope (SEM), and their hardness measurements were made. Obtained test results were compared with that of ZA27 samples without nanodoped. In the SEM analysis, the production method applied was generally successful, and the porous regions encountered in some parts of the composite structure were due to the difficulty in homogeneously dispersing the MWCNT reinforcement material. The metal’s material removal rate (MRR) increased with the addition of MWCNT powders that raised conductivity and decreased tool wear rate (TWR) compared to the pure ZA27 material. © 2024 Yildiz Technical University. All rights reserved.
dc.description.sponsorshipKırıkkale Üniversitesi, KU, (2018/043); Kırıkkale Üniversitesi, KU
dc.identifier.doi10.14744/sigma.2024.00160
dc.identifier.endpage1972
dc.identifier.issn1304-7191
dc.identifier.issue6
dc.identifier.scopus2-s2.0-85211598734
dc.identifier.scopusqualityQ3
dc.identifier.startpage1965
dc.identifier.urihttps://doi.org/10.14744/sigma.2024.00160
dc.identifier.urihttps://hdl.handle.net/20.500.12587/23430
dc.identifier.volume42
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherYildiz Technical University
dc.relation.ispartofSigma Journal of Engineering and Natural Sciences
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241229
dc.subjectEDM; Machinability; Metal Matrix Nano Composite; MWCNT; ZA27
dc.titleInvestigation of machinability by electrical discharge machining method of ZA27/MWCNT composites produced by powder metallurgy
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu