Investigation of mechanical properties AISI 1040 steel welding with electric arc and MIG, applied various heat treatments

Yükleniyor...
Küçük Resim

Tarih

2017

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Pamukkale Univ

Erişim Hakkı

info:eu-repo/semantics/openAccess

Özet

In this study, AISI 1040 welding samples were produced by arc welding and MIG. The full annealing, normalizing, tempering and stress relief annealing treatment was applied for as-received and welded samples. Made process and untreated samples tensile, three point bending, impact and hardness tests were conducted. Tensile strain of the welded parts is higher than in the welded parts. The yield and tensile strength of the as-received and electric arc welded sample has similar value after stress relief treatment. Hard martensitic structure on the outside, inside is seen increasingly become a soft structure. Increasing in hardness was observed starting from the weld filler metal to outside.

Açıklama

Anahtar Kelimeler

AISI 1040, Electric arc-MIG welding, Heat treatment, Tensile test

Kaynak

Pamukkale University Journal Of Engineering Sciences-Pamukkale Universitesi Muhendislik Bilimleri Dergisi

WoS Q Değeri

N/A

Scopus Q Değeri

Cilt

23

Sayı

1

Künye

Ongun A., Uzun İ., Turgut O. K. (2017). Elektrik ark ve gazaltı kaynağı (MIG) ile birleştirilmiş AISI 1040 çeliğinin mekanik özelliklerine, çeşitli ısıl işlemlerin etkisinin incelenmesi. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 23(1), 1 - 5.