Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites

Basit Öğe Kaydı
dc.contributor.authorPul, Muharrem
dc.date.accessioned2020-06-25T18:30:06Z
dc.date.available2020-06-25T18:30:06Z
dc.date.issued2018
dc.departmentKırıkkale Üniversitesi
dc.description.abstractIn this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under the temperatures of 500, 550 and 600 degrees C. Then the hardness was measured and wear test was performed using pin-on-disk method. In the results of tests, the compression pressure of 500 MPa was not sufficient for composite structure to achieve the required density. The highest hardness values were achieved at sintering temperature of 550 degrees C and in 8 % B4C reinforced composite. The highest wear rate was measured in 4% B4C reinforced composite specimen sintered at 600 degrees C. It is determined that a sintering temperature above 550 degrees C had adverse effects on the mechanical properties.en_US
dc.description.sponsorshipKirikkale University, Unit of Scientific Research Projects [2014/060]en_US
dc.description.sponsorshipThis research was sponsored by Kirikkale University, Unit of Scientific Research Projects with code number 2014/060. We would like to thank to institution personnel for support.en_US
dc.identifier.citationMuharrem, Pul. (2018). Effect of B4C reinforcement ratio and sintering temperature on the mechanical behavior in Al-B4C composites. Science of Sintering. 50. 51-61.en_US
dc.identifier.doi10.2298/SOS1801051P
dc.identifier.endpage61en_US
dc.identifier.issn0350-820X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85053934098
dc.identifier.scopusqualityQ2
dc.identifier.startpage51en_US
dc.identifier.urihttps://doi.org/10.2298/SOS1801051P
dc.identifier.urihttps://hdl.handle.net/20.500.12587/7560
dc.identifier.volume50en_US
dc.identifier.wosWOS:000429909100005
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherInt Inst Science Sintering (I I S S)en_US
dc.relation.ispartofScience Of Sintering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMetal matrix compositeen_US
dc.subjectB4C, Sinteringen_US
dc.subjectMechanical behavioren_US
dc.titleEffect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Compositesen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Effect of B4C Reinforcement Ratio and Sintering Temperature on the Mechanical Behavior in Al-B4C Composites.pdf
Boyut:
1.5 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu