Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method

Basit Öğe Kaydı
dc.contributor.authorPul, M.
dc.contributor.authorKucukturk, G.
dc.contributor.authorCalin, R.
dc.contributor.authorSeker, U.
dc.date.accessioned2020-06-25T17:52:20Z
dc.date.available2020-06-25T17:52:20Z
dc.date.issued2011
dc.departmentKırıkkale Üniversitesi
dc.descriptionKUCUKTURK, GOKHAN/0000-0002-2978-8968
dc.description.abstractIn this study, the effects of the reinforcement volume fraction on the abrasive wear behaviour of reinforced MgO composites produced by the vacuum infiltration method with 5, 10, and 15 vol% of the volume fraction of Al matrix were investigated. The abrasive wear tests were carried out by 80, 100, and 180 mesh Al2O3 abrasive paper and the pin-on-disc wear device under 10, 20, and 30 N loads at 0.2 m/s sliding speed for 3 s. At the end of the wear tests, scanning electron microscope photographs of worn surfaces were taken and the microstructures were analysed by energy dispersive spectrometer (EDS). By checking the images of the worn surfaces, it was observed that the abrasive wear effect increased by increasing the reinforcement ratio. The maximum wear loss was reported under 30 N loads and by 80 mesh abrasive paper. It was found that according to the increment of reinforced MgO in the composite, the amount of wear also increased. On the other hand, the amount of porosity and the reinforcement volume fraction are crucial parameters in the abrasive wear effect.en_US
dc.identifier.citationclosedAccessen_US
dc.identifier.doi10.1177/1350650110396307
dc.identifier.endpage90en_US
dc.identifier.issn1350-6501
dc.identifier.issn2041-305X
dc.identifier.issueJ2en_US
dc.identifier.scopus2-s2.0-79951897109
dc.identifier.scopusqualityQ2
dc.identifier.startpage84en_US
dc.identifier.urihttps://doi.org/10.1177/1350650110396307
dc.identifier.urihttps://hdl.handle.net/20.500.12587/5134
dc.identifier.volume225en_US
dc.identifier.wosWOS:000286636200004
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings Of The Institution Of Mechanical Engineers Part J-Journal Of Engineering Tribology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectinfiltrationen_US
dc.subjectcompositeen_US
dc.subjectMgOen_US
dc.subjectabrasive wearen_US
dc.titleEffects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration methoden_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Effects of reinforcement volume fraction on the abrasive wear behaviour of Al-MgO composites produced by the vacuum infiltration method.pdf
Boyut:
801.28 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WOS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu